2018
02/24
Audio Damage Discord4 Multi Effects
Author View comments Tags Tags: , , , , , , , , , , ,

Discord4 is the latest version of our most popular and long-lived product, our Discord stereo pitch shifter. Originally modeled from the H910, Discord has long since become its own effect and a studio standby, and this version includes major additions to further stretch its capabilities. This application includes a stand-alone version (with Inter-App Audio) and an AUv3 effect for use in hosts that support that format, such as Beatmaker 3, AUM, Cubasis, and Garageband. A full PDF manual is available at the Audio Damage website.

Discord4 consists of three separate algorithms: a “vintage” mode (the original Discord algorithm, modeled on the Eventide H910 and H949), a “clean” mode for more modern shifting sounds, and a “granular” mode for experimental effects. Each mode has its strengths, depending on the input material, and Discord3 has a broad palette of capabilities as a result. The P1 and P2 algorithms have full control over the buffer (window) size of the shift effect, for fine tuning the shift to the input signal, or for stranger sound effects. At the extremes of the six-octave shift range, some truly strange aliasing and artifacts can be had with this control.

Discord4 retains its pair of tempo-synced delays and bandpass filters from previous versions, and adds a reverb in the feedback loop (for easy access to “shimmer” effects). We have also replaced the modulation sources from the original with our all-new FLFO (Flexible LFO) design. Panorama controls are included to control the stereo width of the wet signal. Finally, soft saturation and limiting have been added or improved throughout the signal path, for an overall improved sound and added vintage-style warmth, and to allow for extreme feedback experiments without fear of overloading your DAW’s channel.

Features

• Pitch Shifting: Discord4 contains a pair of shifters with three separate algorithms (Vintage, Clean, and Granular) for different styles of pitch shifting.

• Buffer Size Control: The P1 (Vintage) and P2 (Clean) algorithms have a Buffer Size control, from 32 to 2048 samples, for fine-tuning the pitch shifting effect.

• Delay: Tempo-synced or free-running delays with feedback, cross-feedback, and a sophisticated bandpass filter.

• Reverb: A simple stereo reverb is added to the feedback path, for “shimmer” effects and further sound exploration.

• Modulation: Two of our new FLFO (Flexible Low-Frequency Oscillator) with tempo sync and an arbitrary waveform, capable of a nearly infinite number of modulation shapes using only three controls.

• True Stereo Operation: Discord4 has a true stereo signal path, with entirely independent control over each side, finishing with panorama settings for stereo width.

• MIDI Note Control: Six octaves of pitch-shifting can be controlled with MIDI note input.

• All-New GUI: Vector-based resizable user interface.

• Presets: Cross-platform XML-based preset manager.

Get Discord4

2017
12/01
Future Sonic Reverser Delay AU
Author View comments Tags Tags: , , , , ,

A stereo delay effect with LP/HP filter, can be used as an audio unit or as a standalone application. The Reverser Delay is a crystal-clear stereo delay comprised of independent left and right delay channels giving the user separate control over the delay time and feedback for each channel. Each channel also has a dedicated filter to sculpt the tone of the repeats, with the option of switching between high pass and low pass.

However, the crown jewel of the Reverser Delay is its reverse feature which allows for either the left or right delay channels (or both) to be reversed allowing for sonic experimentation not capable on a typical delay unit.

The Reverser Delay makes experimentation simple with an easy to understand user interface. But if users aren’t sure where to start, they can jump straight in and explore the Reverser Delay’s factory presets for inspiration.

Features:

– Stereo delay effect with delay offset, reverse mode, feedback and mix
– Tape-like resyncing of delay offset
– Per-channel state variable filter, offering low pass and high pass modes
– Mono or stereo input
– Clean and simple design
– Runs on both iPads and iPhones
– Selection of factory presets (available when run in an Audio Unit host)

Get FS Reverser Delay

2016
12/01
Virsyn AudioEffX Multi-effects Audio Unit
Author View comments Tags Tags: , , , , , , , , , , , , ,

audioeffx

Multieffect Audioprocessor for iOS. Seven studio quality effect modules for live usage and to enrich your iTunes music library.

### Introductory offer 30% off ###

All effect modules can be used together chained in any order you like.

The Chorus effect is a modulation effect used used to create a richer, thicker sound and add subtle movement. The effect roughly simulates the slight variations in pitch and timing that occur when multiple performers sing or play the same part.

The Delay effect provides you with two different types of delay effects using two delay lines. With Sync mode the delay times can be set by note lengths and are then relative to the currently set tempo. The delayed signal can be feed back to the input for echo effects. You can select between a stereo delay and a ping-pong delay where the echoes bounces across the stereo field.

The Drive effect provides you with different types of distortion from hard clipping to soft distortion simulating analog tube amplifiers and tape machines. The sound balance can be adjusted using a combined High/Lowpass filter.
The distortion algorithm uses oversampling to reduce aliasing artefacts.

The ParaEQ effect is a parametric equalizer with optional graphic editing of Lowpass/Highpass and Bandpass equalizer stage.

The Flanger is composed of two independent delay lines with feedback for the left and the right channel respectively.
The delay time of both delays is modulated by one LFO with adjustable frequency.
For typical flanging effects the delay time should be below 5 milliseconds.

The Phaser is built from an 8-pole allpass filter, which gives you a very short and frequency dependent
delay time. This delay time is modulated by an LFO.

The Reverb effect is used to simulate the sound reflections off walls in different kind of rooms. This reflections
disperse the sound, enriching it by overlapping the sound with its reflection.
This reverb parameter are accessible by the user:
• Tail delay – Sets the amount of time that elapses between the direct sound and the reverberation tail. This time correlates
with the perceived size of the simulated room. The adjustable range is from 0 ms to 300 ms.
• Reverb time – The time the reverb takes to die away by 60dB after the end of the initial sound. This parameter correlates
with the perceived size of the simulated room. The adjustable range is from 50 ms to 100 seconds.
• Room size – The room size parameter sets the average distance between the reflecting walls.
• Diffusion – The Diffusion parameter controls the echo density of the resulting reverberant sound. A higher value
corresponds to a higher echo density which is in most cases more natural sounding.
• Absorption – The Absorption parameter simulates the surface and air absorption of high frequencies. Due to absorption the reverberation time is shorter for high frequencies than for low frequencies. With higher absorption high frequencies will decay much faster.
• Tail stereo – Adjusts the stereo image width of the reverberation tail.
• Tail cutoff / tone – Lowpass and Highpass filter for the reverb tail.

audioeffx

Summary of features:

• Seven studio quality audio effects
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 2 compatible with state saving.
• Apply multi effect to any song in your iTunes library.
• Low latency live usage with mic and headphones.
• Audio recorder
• Ableton Link compatible.

Get AudioEffX

2014
05/02
Crystalline Shimmering Reverb For iPad
Author View comments Tags Tags: , , , , , ,

Crystalline

Crystalline is a shimmer reverb/delay effect for Audiobus and Inter-app audio. Create synth-like tones and textures from almost any sound source, perfect for guitar, vocals, synths, sound design and more.

Guitarists can plug their instrument into an audio interface such as the Apogee Jam and get the elusive shimmer reverb tone they’ve been searching for.

Crystalline is capable of a wide range of sounds, including classic “shimmer” effects from the 80’s, unique pitch shifted delays and lush reverbs. Crystalline is a highly creative and unique effects processor.

Crystalline features two distinct modes:
PERFORM and TWEAK.

● PERFORM mode is focused around four XY touch pads. Touch to control DELAY TIME, FEEDBACK, REVERB and LOW PASS independently for left and right channels.

● TWEAK mode features large expressive sliders and additional effect parameters, allowing you to fine tune your sound.

In addition to Audiobus and Inter-app Audio support, Crystalline can also process external instruments such as guitar, voice and synths by connecting a microphone or professional audio interface such as the Apogee Jam, ONE, or any iOS compatible USB audio interface.

COMPATIBILITY:
● requires iOS 7.0 or later
● iPad Mini/iPad 2 or newer
● Audiobus 2 compatible (Effect, Input, state saving)
● Inter-App audio compatible (effect node)
● compatible with USB audio interfaces

FEATURES:

● Control Left and Right channel delay time, feedback, reverb and more.
● 16 delay modes for a wide variety of pitch shifted delay effects
● Multiple stereo output modes including Wide Stereo, Cross Feedback, Stereo Tremolo and Sum to Mono.
● Huge range of ambient sound effects possible, from beautiful shimmering reverbs to dissonant, metallic delays.

Crystalline works with just about any professional iOS compatible USB audio interfaces. Here is a list of interfaces that have been tested and verified to be compatible:

● Apogee Jam
● Apogee Mic
● Apogee ONE for iPad/Mac
● Apogee DUET for iPad/Mac
● Apogee QUARTET for iPad/Mac
● iConnectMIDI2+
● iConnectMIDI4+
● iRig
● iRig HD
● iRig iMic
● Focusrite Scarlett series (*requires USB hub)
● Alesis io2
● Alesis IO Dock
● Behringer UCA202
● many more

Crystaline is available for $4.99

2012
11/10
Real-Time Tape Echo Looper For iPad and iPhone
Author View comments Tags Tags: , , , , , , , , , ,

Real-time tape echo looper for ipad and iphone

Echo Pad is a real-time Echo effect processor featuring a unique delay + sound on sound looper controlled by a multi-touch XY interface on your iPad, iPhone, and iPod touch device.

Use the built in mic on your headphones, plug in a guitar, microphone, synth, drum machine, iOS device, or whatever you want using an audio interface such as the Apogee Jam or MIC, or one of the many other compatible iOS and USB audio interfaces. (Verified up to date list of compatible audio interfaces below.)

Echo Pad was born out of love for tape echoes, sound on sound loopers and noisy, dirty analog delay pedals. Echo Pad excels at hands on warping delay tones and controlled feedback, and is not afraid to get loud.

Great for both live performance and sound design, Echo Pad was designed to have fun with the ability to sculpt a wide range of delay tones from subtle rhythms to heavy, dubbed out ambient swirls, to aggressive feedback explosions.
Who needs another whack, sterile digital delay to strum generic radio rock riffs with? No one.

Adding to the fun is a no frills sound on sound looper, perfect for quickly looping and layering guitar riffs or vocal melodies, glitching live audio input, building layered ambient soundscapes and more.
Loops can be quickly bounced to an audio file for sharing with other apps.

Echo Pad is a Universal app that supports Audio Copy/Paste (General Pasteboard) for quickly sharing loops and recordings created with Echo Pad with other audio apps, as well as playing back and processing pasted audio from other apps through Echo Pad’s effects. You can also export a loop or recording directly into the AudioShare file management app by using the “Export to AudioShare” functions. This exports your loop or recording directly into the AudioShare app without needing to use AudioCopy/Paste, for a super fast workflow.

Additionally, recordings and loops can be exported to iTunes FIle Sharing for access on your Mac/PC.

New features:

– Route main looper through FX. Record into the main looper, then process it. 🙂

– Paste audio into Main Looper. Paste audio to be automatically recorded and looped in the main sound on sound looper.

– Paste audio to scratch loopers. Paste audio from other apps to load directly into the scratch loopers using AudioPaste.

– Export/AudioCopy Scratch Loop to Pasteboard. Export and AudioCopy current contents of scratch loopers to the pasteboard.

– Export Scratch Loop to AudioShare. Export current contents of scratch loopers directly to AudioShare.

– New delay type: “Shimmer” octave up pitch shift delay, inspired by my favorite blue pedal (rhymes with ES-3).

Improvements:

– adjusted UI for better access of controls

– separate Import and Export menus

– delay hi pass/lo pass filter control (the red circle) is now controlled independently, no longer requires first finger to be onscreen.

– “Output L.P. Filter” replaces previous “Input L.P. Filter”. This now filters the master output, and can be modulated by the L.F.O.

Features:

* Realtime FX processor designed for live performance and sound design
* Multi-touch XY control of delay parameters for expressive control
* Sound on sound looper for creating layered loops on the fly
* Universal app
* Supports iPhone 5 screen
* supports Background audio
* Works with headphones as well as most iOS and professional USB audio interfaces including:
-Apogee Jam
-Apogee Mic
-iRig
-iRig iMic
-Focusrite Scarlett 2i2 (*requires external power thru USB hub)
– Apogee ONE (*requires external power thru USB hub)
– Apogee GIO (*requires external power thru USB hub)
– many more

Sharing/Exporting:
* Audio Copy and Paste for sharing loops and recordings made within Echo Pad, as well as playback and process pasted audio from other apps using Echo Pad in realtime. (General Pasteboard)
* supports NEW “Export to AudioShare” functionality.
Loops and recordings created with Echo Pad can be exported directly to the AudioShare app for easy audio file management.
* recordings & loops are exported to iTunes File Sharing for access on your Mac/PC

Sound design and Control:

* 4 delay types – Tape/analog echo, 8-bit, Rising, Reverse
* LFO assignable to delay time, input filter, volume. Great for subtle to extreme modulated echoes.
*Control delay time, feedback, and echo high pass and low pass filters with XY control. (dual touch, more gestures coming in updates.)
*Toggle slider control panels for access to full parameters.
* Save and recall effect settings.
*BPM sync for rhythmic delays.
*Tap tempo to set delay time and global BPM.
*Sound on sound looper for quickly capturing and layering sound.

Echo Pad is available for $2.99

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.

  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram

  • Dj Samples
    Soundtrack Loops
    Privacy Policies

  • Become a patron at Patreon!

  • Categories

  • Recent Posts

  • Tags

    app audiobus audio effect audio unit auv3 daw dj app drum app Drum Machine Garageband groovebox Guitar Effects IK Multimedia iOS iPad ipad app ipad daw ipad drum machine ipad groovebox ipad sampler ipad synth ipad synthesizer iPhone iphone app iphone synth iphone synthesizer iPod ipod touch app Klevgränd Korg looper looping app loops midi midi Controller midi sequencer music apps music production retronyms sampler sequencer synth Synth App synthesizer VirSyn

  • Archives