BLEASS delay transforms your sounds into cinematic and experimental sonic experiences! It is constantly creating flux in the audio signal making your music even more lively.
BLEASS delay is also ideal for making track build-ups and transitions.
This app will be available February 21st 2019
MAIN FEATURES:
– Delay Line with Sync and Ping Pong Stereo options
– Frequency Shifter in the feedback stage for creating harmonic flux
– Two Filters (Low Pass / High Pass with resonance) for creating warm analog Echo effects
– Each stage has its own LFO with Stereo Phase to create even wider space movements.
All these features are shown within the factory presets, and you can save your own presets which will automatically carry over across different host apps.
All variables are exposed as AU Parameters in hosts which support automation.
BLEASS delay can also be used as a standalone app using headphones and mic or an external sound card.
Check out www.bleass.com for video tutorials and demos.
***NOTE : this is an Audio Unit Effect Plugin (AUv3) which ideally requires a compatible host (such as AUM or Audiobus) or DAW (such as GarageBand or Cubasis) ***
I reviewed Woodman’s Woodulator back in October and well I fell in love with this app. This new update just made it even better.
Ver 1.1 Nov 21, 2018
– added Reverse mode to the Pitch shifters (more Craziness ! )
– added Sawtooth Up and Sawtooth Down to the LFO modes
– LFO modes can now be seen and toggled from main window
– fixed bug in gain calculation of Level rotaries
The Woodulator is a delay and pitch shifter inspired by analog bucket brigade delays. It also includes 2 versatile modulators.
Pitch shifting is obtained by increasing or decreasing the clock in the delay line and not by FFT calculations.
– Has 2 pitch shifters which can go up or down according to a harmonic scale or in chorus mode
– Modulator source can be internal LFO or external side chain
– Modulator destination can be pitch frequency, pitch amplitude, delay amplitude, panning. or feedback amount.
– Modulation of pitch frequency can be up, down or both.
– Delay line color can be set with LP/HP/BP filter and Saturation level.
– Includes HP and LP filters on the input signal
– Includes LP filter on pitch out signals.
– Pitch shifters have Reverse mode.
– BPM can be set, tapped or synced by the DAW host.
– LFO Square has slew-rate control. (control at 100% generates triangle waveform)
– LFO’s have convenient beat/bar timing popup.
– Delay and pitch signals can be panned L-R on a stereo bus/track.
– Delay and pitch shifter timing can be synced to the bar or re-synced manually (playing live)
– Presets can be stored in iCloud Drive (makes them available on all your devices).
– Presets can be switched with Midi Program Changes.
– Major controls can be set with Midi CC messages.
Echo effect Audio Unit V3 inspired by the mayan pyramids acoustic echo. I come up with a complex phase modulated frequency of the echo so you can change it’s frequency signature. It is kind of changing the material of the reflective surface and I called it “Stone F”.
I have made the echo to sound more music friendly to me but there is button called “UFO” and if you press it the effect is more close to the mayan just shifting the frequency backwards (I liked that better). You can also control the feedback of the phase modulation.
The effect can work as a stand alone app and as an audio unit AUV3 plug-in.
Stone Echo is an effect that is heavy on the CPU
Controls:
– Time – time offset of the echo
– Stone F – frequency response of the echo
– Feedback – echo feedback
– Level – the volume of the echo
– UFO – heavy modulated echo
Crystalline is a shimmer reverb/delay effect for Audiobus and Inter-app audio. Create synth-like tones and textures from almost any sound source, perfect for guitar, vocals, synths, sound design and more.
Guitarists can plug their instrument into an audio interface such as the Apogee Jam and get the elusive shimmer reverb tone they’ve been searching for.
Crystalline is capable of a wide range of sounds, including classic “shimmer” effects from the 80’s, unique pitch shifted delays and lush reverbs. Crystalline is a highly creative and unique effects processor.
Crystalline features two distinct modes:
PERFORM and TWEAK.
● PERFORM mode is focused around four XY touch pads. Touch to control DELAY TIME, FEEDBACK, REVERB and LOW PASS independently for left and right channels.
● TWEAK mode features large expressive sliders and additional effect parameters, allowing you to fine tune your sound.
In addition to Audiobus and Inter-app Audio support, Crystalline can also process external instruments such as guitar, voice and synths by connecting a microphone or professional audio interface such as the Apogee Jam, ONE, or any iOS compatible USB audio interface.
COMPATIBILITY:
● requires iOS 7.0 or later
● iPad Mini/iPad 2 or newer
● Audiobus 2 compatible (Effect, Input, state saving)
● Inter-App audio compatible (effect node)
● compatible with USB audio interfaces
FEATURES:
● Control Left and Right channel delay time, feedback, reverb and more.
● 16 delay modes for a wide variety of pitch shifted delay effects
● Multiple stereo output modes including Wide Stereo, Cross Feedback, Stereo Tremolo and Sum to Mono.
● Huge range of ambient sound effects possible, from beautiful shimmering reverbs to dissonant, metallic delays.
Crystalline works with just about any professional iOS compatible USB audio interfaces. Here is a list of interfaces that have been tested and verified to be compatible:
● Apogee Jam
● Apogee Mic
● Apogee ONE for iPad/Mac
● Apogee DUET for iPad/Mac
● Apogee QUARTET for iPad/Mac
● iConnectMIDI2+
● iConnectMIDI4+
● iRig
● iRig HD
● iRig iMic
● Focusrite Scarlett series (*requires USB hub)
● Alesis io2
● Alesis IO Dock
● Behringer UCA202
● many more
Echo Pad is a real-time Echo effect processor featuring a unique delay + sound on sound looper controlled by a multi-touch XY interface on your iPad, iPhone, and iPod touch device.
Use the built in mic on your headphones, plug in a guitar, microphone, synth, drum machine, iOS device, or whatever you want using an audio interface such as the Apogee Jam or MIC, or one of the many other compatible iOS and USB audio interfaces. (Verified up to date list of compatible audio interfaces below.)
Echo Pad was born out of love for tape echoes, sound on sound loopers and noisy, dirty analog delay pedals. Echo Pad excels at hands on warping delay tones and controlled feedback, and is not afraid to get loud.
Great for both live performance and sound design, Echo Pad was designed to have fun with the ability to sculpt a wide range of delay tones from subtle rhythms to heavy, dubbed out ambient swirls, to aggressive feedback explosions.
Who needs another whack, sterile digital delay to strum generic radio rock riffs with? No one.
Adding to the fun is a no frills sound on sound looper, perfect for quickly looping and layering guitar riffs or vocal melodies, glitching live audio input, building layered ambient soundscapes and more.
Loops can be quickly bounced to an audio file for sharing with other apps.
Echo Pad is a Universal app that supports Audio Copy/Paste (General Pasteboard) for quickly sharing loops and recordings created with Echo Pad with other audio apps, as well as playing back and processing pasted audio from other apps through Echo Pad’s effects. You can also export a loop or recording directly into the AudioShare file management app by using the “Export to AudioShare” functions. This exports your loop or recording directly into the AudioShare app without needing to use AudioCopy/Paste, for a super fast workflow.
Additionally, recordings and loops can be exported to iTunes FIle Sharing for access on your Mac/PC.
New features:
– Route main looper through FX. Record into the main looper, then process it. 🙂
– Paste audio into Main Looper. Paste audio to be automatically recorded and looped in the main sound on sound looper.
– Paste audio to scratch loopers. Paste audio from other apps to load directly into the scratch loopers using AudioPaste.
– Export/AudioCopy Scratch Loop to Pasteboard. Export and AudioCopy current contents of scratch loopers to the pasteboard.
– Export Scratch Loop to AudioShare. Export current contents of scratch loopers directly to AudioShare.
– New delay type: “Shimmer” octave up pitch shift delay, inspired by my favorite blue pedal (rhymes with ES-3).
Improvements:
– adjusted UI for better access of controls
– separate Import and Export menus
– delay hi pass/lo pass filter control (the red circle) is now controlled independently, no longer requires first finger to be onscreen.
– “Output L.P. Filter” replaces previous “Input L.P. Filter”. This now filters the master output, and can be modulated by the L.F.O.
Features:
* Realtime FX processor designed for live performance and sound design
* Multi-touch XY control of delay parameters for expressive control
* Sound on sound looper for creating layered loops on the fly
* Universal app
* Supports iPhone 5 screen
* supports Background audio
* Works with headphones as well as most iOS and professional USB audio interfaces including:
-Apogee Jam
-Apogee Mic
-iRig
-iRig iMic
-Focusrite Scarlett 2i2 (*requires external power thru USB hub)
– Apogee ONE (*requires external power thru USB hub)
– Apogee GIO (*requires external power thru USB hub)
– many more
Sharing/Exporting:
* Audio Copy and Paste for sharing loops and recordings made within Echo Pad, as well as playback and process pasted audio from other apps using Echo Pad in realtime. (General Pasteboard)
* supports NEW “Export to AudioShare” functionality.
Loops and recordings created with Echo Pad can be exported directly to the AudioShare app for easy audio file management.
* recordings & loops are exported to iTunes File Sharing for access on your Mac/PC
Sound design and Control:
* 4 delay types – Tape/analog echo, 8-bit, Rising, Reverse
* LFO assignable to delay time, input filter, volume. Great for subtle to extreme modulated echoes.
*Control delay time, feedback, and echo high pass and low pass filters with XY control. (dual touch, more gestures coming in updates.)
*Toggle slider control panels for access to full parameters.
* Save and recall effect settings.
*BPM sync for rhythmic delays.
*Tap tempo to set delay time and global BPM.
*Sound on sound looper for quickly capturing and layering sound.
Echo Pad is available for $2.99
iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle).
You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
As an Amazon Associate I earn from qualifying purchases.
