2017
03/25
Virsyn BandShift Frequency Shifter App
Author View comments Tags Tags: , , , , , ,

BandShift is a multi-band auditory filter and frequency shifter taking a new approach to manipulate the pitch of complex sound sources in realtime. The well know analog Bode frequency shifter shifts all frequencies in an input up by the same amount and thereby alters their harmonic relation and tends to produce inharmonic results. But it’s perfect in dealing with transients and sounds smooth even with high amounts of down pitching.

BandShift splits the spectrum in 27 bands and applies a different amount of frequency shifting to each band emulating a harmonic pitch shifting. This gives you perfect pitch shifting for all kind of drum sounds over a vast shifting range of +/- five octaves without disturbing the transients or introducing metallic distortions. The extreme range of shifting gives you access to a vast field of unknown sonic territory.

The possibility to apply different shiftings on each band gives you exciting possibilities: Suppose you have a drum loop which is perfect, but the bass drum is a bit too high or too low to fit in your mix then you can easily get the bass drum shifted a bit down and the rest of the spectrum remains unchanged. But it’s applications are not limited to drum sounds, they’re only limited by your imagination.

Features:

• Multi band bode frequency shifter
• Linear phase filter bank with 27 bands
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 2 compatible with state saving.
• Apply effect to any song in your iTunes library.
• MIDI Learn for X/Y Pads
• Low latency live usage with mic and headphones.
• Audio recorder

Get BandShift:

### Introductory offer for a limited time ###

2016
10/13
RF-1 Reverb Audio Unit For iOS
Author View comments Tags Tags: , , , , , ,

rf-1-reverb

RF-1 – Algorithmic Reverb (AU, AB, IAA, Standalone) – RF-1 is a collection of algorithmic reverbs capable of creating a variety of effects ranging from small rooms to huge, heavily modulated spaces and everything in between.  RF-1 comes packed with multiple reverb algortihms, a solid standalone application, carfully tuned factory presets and a plethora of tweak-able controls. What’s more, RF-1 integrates with everything from AudioUnit Hosts over Audiobus to Inter-App Audio, Guitar- and USB Interfaces.

RF-1 Reverb Audio Unit

Features:
* 5 unique reverb programs (see below)
* Continuously variable size
* Variable pre-delay
* Diffusion control
* Damping control
* Width control
* High- and Low shelves (+/- 6db pre effect)
* Mod section with depth and speed controls (Sine LFO 0.01hz to 5.0hz)

Programs:
1. Hall
Clean and bright sounding space with subtile modulation and gradually building density.

2. Plate
Dark, highly diffused sound with high initial echo density and dark modulation.

3. EnsembleVerb
Capable of huge, wide spaces with deep modulation.

4. TremoloVerb
Large, bright and always moving with amplitude modulation at the output.

5. VintageVerb
Dark, noisy and wonderfull sounding reverb modeled after the first digital reverbs from the late 70s. (10khz bandwidth / 12bit processing)

Connectivity:
* AudioUnitV3 Effect
* Inter-App Audio Effect
* Audiobus (Filter)
* Ableton Link
* USB Audio Interface (Standalone)
* Guitar Interface (Standalone)
* Microphone (Standalone)

RF-1 Reverb

2016
07/28
Retro Tape Echo Audio Unit For iOS
Author View comments Tags Tags: , , , , , ,

Lofionic Duplicat Icon

Lofionic Duplicat is a warm and lush tape delay effect for iOS, supporting AudioUnit Extensions, Inter-App Audio and Audiobus.

In addition to the Swell and Sustain controls found on the hardware equivalents, Duplicat introduces a tape Speed control, for fine tuning the rate of delay in realtime, and a tape Effect control which emulates the deteriorating effect of using worn tape by gradually introducing degradation to the feedback.

Duplicat is perfect for adding lush, organic sounding delay to your mixes ranging from trashy lo-fi grungy tones, through psychadelic swirls, to subtle slap-back.

Lofionic Duplicat

Get Lofionic Duplicat

2016
03/30
RP-1 Powerful New Effect Delay For iOS
Author View comments Tags Tags: , , , , , ,

RP-1 Digital Delay For iOS

RP-1 – Dual Digital Delay FX. Two separate (stereo) delay lines allow for a wide range of effects ranging from basic slapback and ping-ping type echos to complex modulations and soundscapes. Very powerful loaded with features.

* Overview
– Digital Stereo Delay with High- and Lowpass filters, Stereo spread and Looping
– Separate modulation Delay for Chorus, Vibrato, Flanger and Panning effects
– Both sections can be bypassed individually
– Mod section can be routed pre or post delay
– Delay Times from 10ms to 2000ms (or 1/32 to 2bars)
– Tempo Sync via AudioUnit Host or Ableton Link
– Tap Temp and Manual Tempo
– Normal, Dotted and Triplet
– Stereo Spread
– Simple 1-Button Looping

RP-1 digital delay for iOS

* Connections
– AudioUnitV3 Effect
– Inter-App Audio Effect
– Audiobus (Filter)
– Ableton Link
– USB Audio Interface
– Microphone

RP-1

2016
02/26
Frekvens frequency shifter and delay effect for iOS
Author View comments Tags Tags: , , , ,

frekvens audio effects for iOS

Frekvens is a frequency shifter and delay effect. Unlike a pitch shifter all frequencies are shifted linearly and then fed back into itself using the stereo delay unit. The frequency shifting is achieved with single sideband modulation using a hilbert transform and an infinite impulse response filter for fast computations. Frekvens also comes with a high and low pass filter and a lfo for modulating the delay play head.

Frekvens iPad

– frequency shifter
– high, low pass filter
– stereo delay
– core midi cc input.
– audiobus
– inter app audio
– save, load

Frekvens

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Become a patron at Patreon!
  • Categories

  • Recent Posts

  • Tags

  • Archives