2022
09/02
Varispeed Tape Echo For iPad
Author View comments Tags Tags: , , , ,
Classic tape echo machine

Classic tape echo machine

Authentic recreation of a classic tape echo machine. GSi VariSpeed is a simulation of the WEM Copicat IC-400 Belt Drive VariSpeed model, the first tape echo machine made by WEM with a DC capstan motor capable of changing speed, thus varying the delay time. GSi VariSpeed replicates the hardware instrument “as is” with all its pros and cons, without any additional feature. This can be considered as the second chapter of a tribute to the genius of Mr. Charlie Watkins that GSi began back in 2008 with the release of the freeware “WatKat”, which was a simulation of the “Custom Copicat”. Please note: this is an AUv3 plugin that can be used with compatible host Apps.

Get VariSpeed HERE

2022
08/28
Free Passive Filter EQ From Red Rock Sound
Author View comments Tags Tags: , , , , , ,
RRS HLF-3C

Free Passive Filter App Pultec HLF-3C For iOS

Red Rock Sound presents their anniversary plugin AD IT emulates a Pultec HLF-3C for iPhone and iPad.

For 10 years we have been delighting you with professional plugins at an affordable price. Thank you for support!

The HLF-3C completes the Passive EQ Collection. This plug-in has 12 dB per octave low and high cut filters, providing broad retro-tonal sculpting or bygone-era special effects, without the inconvenience of insertion loss found with the unamplified passive hardware.

You can easily subtract the unnecessary frequencies in any instrument and sub-group so they stay wonderfully musical in the mix.

The original HLF-3C hardware unit is a true passive design; there are no input/output amplifiers and it does not require any external power. As a result, there is an inherent loss of signal level when using the HLF-3C hardware. The RRS HLF-3C plug-in compensates for this inherent signal loss for simplified use in the modern era; it has unity gain upon insertion (there is no insertion loss until one or both of the cut filters is engaged).

The HLF-3C interface is very simple and includes only three controls:

• Enable — This toggle switch is the plug-in bypass control. When in the down position (bypassed), plug-in processing is disabled altogether. The plug-in is engaged with the switch is in the up position. This switch can be used to compare the processed settings to that of the original signal;

• Low Cut — This rotary switch specifies the cutoff frequency of the low cut filter. Eleven frequencies are available: 50, 80, 100, 150, 250, 500, 750, 1000, 1500 and 2000 CPS;

• High Cut — This rotary switch specifies the cutoff frequency of the high cut filter. Eleven frequencies are available: 1.5, 2, 3, 4, 5, 6, 8, 10, 12 and 15 KCS.

To use HLF-3C as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — HLF-3C will appear in the list of Audio Unit extensions for effect plug-ins in the host app.

Get Red Rock Sound HLF-3C HERE

2022
08/22
Echo B2 Italian Echo for iPad
Author View comments Tags Tags: , , ,
The classic italian tube echo machine in your iPad

The classic italian tube echo machine in your iPad

The classic italian tube echo machine in your iPad

PLEASE NOTE: This is a AUv3 plugin, use it with a compatible host App.

GSi ECHO B2 is the digital recreation of a particular unit of Binson Echorec mod. T5E that, despite being more than 50 years old, still has its original tubes and has had very little service in the last 30 years. We don’t know how this unit sounded when it was new, but this is how it sounds today, in 2022.

Echo B2 echo app

Echo B2 echo app

The plugin features all controls found on the original unit, plus 4 extra knobs for adjusting the alignment of each head (aka Azimuth on tape machines), one extra knob to slow down the drum motor up to half the normal speed (to obtain doubled delay times) and one last knob to adjust the level of audible circuit hiss.

All parameters can be Midi controllable. All Midi CC numbers can be freely assigned.

Works with all major AUv3 hosts, including Camelot, AUM and Garage Band.

Can be used standalone with an external audio interface.

Get Echo B2 HERE https://apps.apple.com/us/app/echo-b2/id1640987290

2022
08/22
Red Rock Sound CL1 Compressor
Author View comments Tags Tags: , , , , , ,
Soviet Compressor for iOS

Soviet Compressor for iOS

Red Rock Sound CL1 is stereo and mono audio signal dynamic range compressor. CL1 compressor has distinctive sound allowing its usage not only for technical purpose of dynamic range compression but also for artistic sound coloration, which happens due to usage of saturation with even harmonics, dithering that gives effect of «air» and oversampling with non-linear phase response that gives effect of «depth».

CL1 compressor besides main dynamic range compression module also contains limiting module («limiter»), which allows controlling peaks passing through the compressor, mid-range equalizer module doing ISO-226 curves equalization and input signal or gain reduction VU-meter with lamp indicator for limiter operation control. CL1 compressor has adjustable high-pass filter for side-chain signal, also supports «parallel» compression and M/S operational mode.

FEATURES

Two different attack modes: «fast» and «slow»;
Softness of compressor characteristics control;
6 operation modes: double mono, mono with external side-chain signal, mid channel, side channel, M/S, linked stereo;
Mid-range equalizer and Side-chain signal high-pass filter;
Pre- or Post-Limiter;
Attack and Release times multiplier;
Internal Dithering;
Parallel compression;
8x oversampling and 64-bit floating point processing;
External Side-chain.
ATTACK MODE

Red Rock Sound CL1

Red Rock Sound CL1

In «Fast» mode when control signal reaches Threshold the compressor immediately and very fast starts to lower the signal level slowing down by exponential law;
In «Slow» mode the compressor in the same situation starts gain reduction very slowly thus most attack of the signal passes through.
MID SCOOP

The built-in mid-frequencies equalizer is based on mid-frequency range equal loudness curves design and can be used as another tool to position instruments, with ability to highlight backside elements or to add a bit density to frontal elements and move them back at the same time.
CL1 developed on the basis of «МОЛОТ» compressor by Vladislav Goncharov.

RRS CL1 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the CL1 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of CL1 AUv3 plug-in comes as In-App Purchase.

To use CL1 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — CL1 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.

Get Red Rock Sound CL1 HERE https://redrocksound.pro/products/cl1-au/

2022
06/23
Fosfat Designer Shaper App
Author View comments Tags Tags: , , , , ,
Transient shaper app for iOS

Transient shaper app for iOS

Intro sale until 11 July with 40% off!

Fosfat – Transient Fertilizer, will add bite and oomph to your beat. It enriches your percussive sounds by following the dynamic of the incoming sound and adding tonal and noise textures to it. We think of it almost like an EQ, in the way it shapes the sound, but it adds instead of cutting or boosting. It’s perfect for when you have a nutrient deficient recording (lacking bass or attack in the kick for example), or if you just want to add some extra sub or pleasant stereo fizz to any percussive sound.

In addition to the obvious option of using multiple instances of Fosfat across your drum tracks, the possibility to precisely dial in it’s trigger lets you pinpoint any frequency area or transient of your choice in recordings of whole drum kits or any drum loop sample, thus giving you a very efficient and musical way of enhancing specific parts. Together with an oscillator, noise, low and high cut filters, stereo width, gain and more, you have a beat-fertilizing hothouse letting your percussive sounds really grow and bloom.

Features:

• Multiple audio-visualizations makes dialing in accurate settings very easy
• Controls for trigger frequency and width respectively
• Sine wave oscillator with optional pitch drop
• Noise with adjustable stereo width
• Attack and release
• Low cut and high cut filters
• 4 instances of volume control
• Wave rendition

Read more: https://klevgrand.com/products/fosfat

  • DAILY STATS


    4,506
    VISITORS
    TODAY
    Powered By Google Analytics
  • iPad Loops is a music app blog dedicated to exposing the best iPad apps for iOS musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my loops are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Categories

  • Recent Posts

  • Tags

  • Archives