2017
08/12
Bark Filter Multi Band Filter / Compressor
Author View comments Tags Tags: , , , , ,

The multi band filter in Bark takes the approach to match the reception characteristic of the gate where all sounds must pass through: the human ear. The ear behaves as if it contains a bank of filters, each filter passing frequencies within their respective critical band. Two tones apart more than the frequency dependant critical bandwidth are perceived as separate tones. For this reason Bark contains a filter bank with 27 very steep bandpass filters matching the critical bandwidth characteristic of the human ear. In fact, the human ear have also its own built in multi band compression system which are based on the critical bands.

Why the name Bark ? The Bark scale is a frequency scale on which equal distances correspond with perceptually equal distances. Above about 500 Hz this scale is more or less equal to a logarithmic frequency axis. Below 500 Hz the Bark scale becomes more and more linear.

Multiband compressors can act differently on different frequency bands. The advantage of multiband compression over full-bandwidth compression is that unneeded audible gain changes or “pumping” in other frequency bands is not caused by changing signal levels in a single frequency band. Bark can act both as single band compressor and with up to 27 bands in multiband mode by linking critical bands.

The linear phase filter bank with its steep filter slopes can be used for unusually pronounced filter effects too…

What’s New in Version 1.1.0
– AUv3 Parameter Automation added

Features:

• Multi band dynamic range compressor with up to 27 bands
• Variable number of compressor bands (1..27)
• Threshold/Ratio Attack/Release and Makeup Gain
• Linear phase precision filters for maximal transparency
• Real time pre/post processing calibrated spectrum analyser
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 3 compatible with state saving.
• Low latency live usage with mic and headphones.
• Audio recorder

Get Bark Filter

2017
06/09
Virsyn Eight Voice Harmonizer App
Author View comments Tags Tags: , , , , ,

Up to eight pitch shifted voices are created from vocal input or monophonic instruments.

Position each voice in space ( left and right / front and back )

Modify the voice character from male to female and vice versa.

Pitch shift each voice in the range of +/- one octave with preserving of formants for natural sound.

Applying separate feedback delays on each voice creates complex rhythmical patterns.

Features:

• 8 Voice Pitch Shifter with formant correction
• 8 Independent delay lines with optional sync
• Spatial voice positioning
• Parametric Equalizer
• Integrated Compressor/Limiter/Noise Gate
• Ensemble effect
• Reverb effect
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 2 compatible with state saving.
• Low latency live usage with mic and headphones.
• Audio recorder

### Introductory offer for a limited time ###

Get Eight Voice

2017
03/25
Virsyn BandShift Frequency Shifter App
Author View comments Tags Tags: , , , , , ,

BandShift is a multi-band auditory filter and frequency shifter taking a new approach to manipulate the pitch of complex sound sources in realtime. The well know analog Bode frequency shifter shifts all frequencies in an input up by the same amount and thereby alters their harmonic relation and tends to produce inharmonic results. But it’s perfect in dealing with transients and sounds smooth even with high amounts of down pitching.

BandShift splits the spectrum in 27 bands and applies a different amount of frequency shifting to each band emulating a harmonic pitch shifting. This gives you perfect pitch shifting for all kind of drum sounds over a vast shifting range of +/- five octaves without disturbing the transients or introducing metallic distortions. The extreme range of shifting gives you access to a vast field of unknown sonic territory.

The possibility to apply different shiftings on each band gives you exciting possibilities: Suppose you have a drum loop which is perfect, but the bass drum is a bit too high or too low to fit in your mix then you can easily get the bass drum shifted a bit down and the rest of the spectrum remains unchanged. But it’s applications are not limited to drum sounds, they’re only limited by your imagination.

Features:

• Multi band bode frequency shifter
• Linear phase filter bank with 27 bands
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 2 compatible with state saving.
• Apply effect to any song in your iTunes library.
• MIDI Learn for X/Y Pads
• Low latency live usage with mic and headphones.
• Audio recorder

Get BandShift:

### Introductory offer for a limited time ###

2017
01/17
Virsyn ReSlice Audio Slicer For iPhone and iPad
Author View comments Tags Tags: , , , , , , ,

Slice your audio samples with ReSlice and create flexible musical atoms which can be triggered by MIDI notes or the touch of your fingers. The polyrhythm Arpeggiator redefines the art of creating new loops from the extracted slices. Record live or import audio from clipboard or AudioShare to break it up into its rhythmic components. Apply the intelligent slice parameter and Arpeggio randomizer for instant creation of the unheard.

### introductory offer for a limited time ###

Features:

Audio Slicer

• Automatic break up of sample/drum loop into up to 32 slices
• Edit slice positions.
• Edit level, pan, pitch and envelope for each slice
• Import audio from clipboard or AudioShare
• Record audio for instant slicing and reusing in realtime

Effect section

• Seven studio standard effects concurrently usable:
• Oversampled distortion with four different algorithms for antialiased sound.
• Lowpass / Highpass / Bandpass parametric equalizer
• 8 pole analog Phaser
• Flanger
• Four line chorus
• Stereo/Ping-Pong delay with glitch free delay time change.
• Hi end reverberation unit.

Four part Polyrhythm Arpeggiator

• Uses programmable sequences with up to 32 steps.
• Trigger slices using 4 arpeggio parts with different settings
• Unique randomizer generates Arpeggios with 100% usability.
• Factory arpeggios included, unlimited user arpeggios possible.

Global

• AUv3 AudioUnit
• Inter App Audio
• Audiobus 2 support with state saving.
• Play slices live with the onscreen keyboard.
• Can use CoreMIDI compatible MIDI Keyboard.
• Audio recorder with share function.
• Share user presets.
• Support for virtual MIDI input connections.
• Multichannel MIDI Learn for external MIDI controllers.
• MIDI Tempo sync. Start/Stop Arpeggio.
• Ableton Link compatible.

Get ReSlice

2016
12/01
Virsyn AudioEffX Multi-effects Audio Unit
Author View comments Tags Tags: , , , , , , , , , , , , ,

audioeffx

Multieffect Audioprocessor for iOS. Seven studio quality effect modules for live usage and to enrich your iTunes music library.

### Introductory offer 30% off ###

All effect modules can be used together chained in any order you like.

The Chorus effect is a modulation effect used used to create a richer, thicker sound and add subtle movement. The effect roughly simulates the slight variations in pitch and timing that occur when multiple performers sing or play the same part.

The Delay effect provides you with two different types of delay effects using two delay lines. With Sync mode the delay times can be set by note lengths and are then relative to the currently set tempo. The delayed signal can be feed back to the input for echo effects. You can select between a stereo delay and a ping-pong delay where the echoes bounces across the stereo field.

The Drive effect provides you with different types of distortion from hard clipping to soft distortion simulating analog tube amplifiers and tape machines. The sound balance can be adjusted using a combined High/Lowpass filter.
The distortion algorithm uses oversampling to reduce aliasing artefacts.

The ParaEQ effect is a parametric equalizer with optional graphic editing of Lowpass/Highpass and Bandpass equalizer stage.

The Flanger is composed of two independent delay lines with feedback for the left and the right channel respectively.
The delay time of both delays is modulated by one LFO with adjustable frequency.
For typical flanging effects the delay time should be below 5 milliseconds.

The Phaser is built from an 8-pole allpass filter, which gives you a very short and frequency dependent
delay time. This delay time is modulated by an LFO.

The Reverb effect is used to simulate the sound reflections off walls in different kind of rooms. This reflections
disperse the sound, enriching it by overlapping the sound with its reflection.
This reverb parameter are accessible by the user:
• Tail delay – Sets the amount of time that elapses between the direct sound and the reverberation tail. This time correlates
with the perceived size of the simulated room. The adjustable range is from 0 ms to 300 ms.
• Reverb time – The time the reverb takes to die away by 60dB after the end of the initial sound. This parameter correlates
with the perceived size of the simulated room. The adjustable range is from 50 ms to 100 seconds.
• Room size – The room size parameter sets the average distance between the reflecting walls.
• Diffusion – The Diffusion parameter controls the echo density of the resulting reverberant sound. A higher value
corresponds to a higher echo density which is in most cases more natural sounding.
• Absorption – The Absorption parameter simulates the surface and air absorption of high frequencies. Due to absorption the reverberation time is shorter for high frequencies than for low frequencies. With higher absorption high frequencies will decay much faster.
• Tail stereo – Adjusts the stereo image width of the reverberation tail.
• Tail cutoff / tone – Lowpass and Highpass filter for the reverb tail.

audioeffx

Summary of features:

• Seven studio quality audio effects
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 2 compatible with state saving.
• Apply multi effect to any song in your iTunes library.
• Low latency live usage with mic and headphones.
• Audio recorder
• Ableton Link compatible.

Get AudioEffX

  • DAILY STATS


    6,051
    VISITORS
    TODAY
    Powered By Google Analytics
  • iPad Loops is a music app blog dedicated to exposing the best iPad apps for iOS musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my loops are Retronyms AudioCopy, LP-5, iPRO.DJSAMPLER, Looptastic, and Audio Elements. My work is published by Magix Soundtrack Loops, Sample Logic, Acoustica, Xmix, and many more. Subscribe to our RSS feed below to get updated when new apps are posted.

  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed



    Instagram
  • Categories

  • Recent Posts

  • Tags

  • Archives

  • Alexa Rank