2022
08/22
Red Rock Sound CL1 Compressor
Author View comments Tags Tags: , , , , , ,
Soviet Compressor for iOS

Soviet Compressor for iOS

Red Rock Sound CL1 is stereo and mono audio signal dynamic range compressor. CL1 compressor has distinctive sound allowing its usage not only for technical purpose of dynamic range compression but also for artistic sound coloration, which happens due to usage of saturation with even harmonics, dithering that gives effect of «air» and oversampling with non-linear phase response that gives effect of «depth».

CL1 compressor besides main dynamic range compression module also contains limiting module («limiter»), which allows controlling peaks passing through the compressor, mid-range equalizer module doing ISO-226 curves equalization and input signal or gain reduction VU-meter with lamp indicator for limiter operation control. CL1 compressor has adjustable high-pass filter for side-chain signal, also supports «parallel» compression and M/S operational mode.

FEATURES

Two different attack modes: «fast» and «slow»;
Softness of compressor characteristics control;
6 operation modes: double mono, mono with external side-chain signal, mid channel, side channel, M/S, linked stereo;
Mid-range equalizer and Side-chain signal high-pass filter;
Pre- or Post-Limiter;
Attack and Release times multiplier;
Internal Dithering;
Parallel compression;
8x oversampling and 64-bit floating point processing;
External Side-chain.
ATTACK MODE

Red Rock Sound CL1

Red Rock Sound CL1

In «Fast» mode when control signal reaches Threshold the compressor immediately and very fast starts to lower the signal level slowing down by exponential law;
In «Slow» mode the compressor in the same situation starts gain reduction very slowly thus most attack of the signal passes through.
MID SCOOP

The built-in mid-frequencies equalizer is based on mid-frequency range equal loudness curves design and can be used as another tool to position instruments, with ability to highlight backside elements or to add a bit density to frontal elements and move them back at the same time.
CL1 developed on the basis of «МОЛОТ» compressor by Vladislav Goncharov.

RRS CL1 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the CL1 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of CL1 AUv3 plug-in comes as In-App Purchase.

To use CL1 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — CL1 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.

Get Red Rock Sound CL1 HERE https://redrocksound.pro/products/cl1-au/

2020
06/04
OTT Compressor Limiter iPad iPhone
Author View comments Tags Tags: , , , , , , ,

Bram Bos WOOTT Logo

WOOTT is an Audio Unit plugin (AUv3 audio effect) inspired by the infamous OTT sound.

WOOTT uses a triple band dynamics algorithm with simultaneous downwards AND upwards compression, and adds a dedicated limiter to each band. So what’s all that techno mumbojumbo good for?

1. First, it slams all the loud, dominant aspects of your sound
2. Next it blows up all the subtle quiet bits that were hiding below

As a result, it’s perfect for:

– Blowing up average sounds to massive proportions
– Giving an aggressive sharp edge to synthesizer filters
– Bringing out subtle details and movement that would otherwise get lost in the mix (in a hamfisted way, though)
– Dusting off old breakbeat samples and loops
– Hyping specific aspects of your synth lines
– Making generally boring things more interesting

WOOTT features:

– AUv3 audio unit effect plugin
– Universal (all iPads and iPhones supported), iOS11+
– Runs in all your favorite plugin hosts: Cubasis, AUM, Beatmaker 3, Nanostudio 2, Garageband, etc.
– Multi-output (requires compatible host) for post-processing the individual bands
– Low-resource, so stack as many of them as you like – “[WO]OTT all the things!”
– Downwards *and* upwards compressors (a rare feature on conventional dynamics plugins)
– Smart soft limiter per band, adapts to its own band’s specific settings

Note: this is not a subtle effect. If subtle and minimal are what you’re after, this is not the droid you’re looking for 🙂

GET THIS APP HERE http://ruismaker.com/woott/

2019
05/24
Bleass Sidekick Pumping Compressor
Author View comments Tags Tags: , , , , , ,

Bleass Sidekick Sidechain Compressor

The BLEASS sidekick AUv3 is the world’s first iOS AUv3 effect plugin that offers a kick drum synth and sequencer coupled with a sidechain compressor in order to bring unique and creative dynamics to your music!

All music producers alike will enjoy the instant pumping effect in the mix and the fully customizable kick drum sonic impact brought by the BLEASS sidekick Audio Unit plugin.

Inspired by the classic 808 analog sound as well as many other legendary drum machines, the drum synth features extensive and precise parameters to get punchy / boomy / drum kick sounds:

– kick tuning, decay and volume

– sinus to triangle waveforms

– fine-tuned hardness, body and impact adjustments

– punch envelope with power and decay

– ghost mode (to simulate the sidechain compressor without the sound of the kick)

– trigger mode AU parameter

________Sidechain Compressor / Ducker

– compression triggered by the kick

– threshold, ratio and makeup sliders

– attack and release for precise compression envelope

________Step Sequencer :

– up to 16 steps sequencer

– ternary and binary steps resolution from 8 to 32th.

– adjustable groove (swing)

________Audio Unit :

– All settings accessible via Audio Unit parameters

– Universal compatibility with iOS 10 or higher

– resource-efficient and low CPU usage

By using the treshold and ghost mode parameter, you also can use the BLEASS sidekick either only as a kick drum generator or only as a sidechain compressor.

BLEASS sidekick also includes a standalone version that can be used along an external audio input.

Get Bleass Sidekick HERE

2018
11/26
Woodpressor Compressor Update
Author View comments Tags Tags: , , , , , ,

Audio unit compressor with sidechain

Woodpressor is a high-end audio compressor. It is both a standalone app supporting IAA (Inter-App Audio) and an AUv3 audio unit plugin.
It has all the classic compressor controls like “Threshold”, “Attack”, “Release”, “Ratio”, etc

Ver 1.7 Nov 18, 2018
– Added Brick-wall Limiter
– Added Clip Led
– Added Max dB Out value

bug fixes/improvements :
– fixed small dependency from Tube Class A amount on Distort amount
– BPFilter Listen does not add the Makeup gain any longer (could cause clipping)

– Auto gain
– Tube distort
– Adaptive Threshold
– Non-linear Release
– Side chain filter (bandpass, highpass, lowpass or notch)
– Makeup Gain Limiter
– Brick-wall Limiter

It also has it’s own side chain mechanism as currently no or very little AUv3 hosts implement a side chain.

Woodpressor can save/load user presets, especially useful in standalone mode (or for AUv3 hosts not having their own preset store)
User Presets are written to iCloud Drive which makes them automatically available (and synced, and backed-up) on all devices (and all host apps or DAW’s) running Woodpressor.

Get Woodpressor here https://itunes.apple.com/app/id1410677870?mt=8&ign-mpt=uo%3D8

2018
10/17
AU Compressor Sidechaining
Author View comments Tags Tags: , , , , , , ,

Audio unit compressor with sidechain

The Woodman Woodpressor audio unit has a nifty little sidechain feature and it’s super easy to use. I chose to do this in Cubasis but it works the same in other apps like AUM for example.

Get Woodpressor here http://woodmansimmaculatemaplesyrupstudio.be/

  • DAILY STATS


    5,344
    VISITORS
    TODAY
    Powered By Google Analytics
  • iPad Loops is a music app blog dedicated to exposing the best iPad apps for iOS musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Categories

  • Recent Posts

  • Tags

  • Archives