2018
02/27
Grand Finale Multi Effect Audio Processor
Author View comments Tags Tags: , , , , , , , ,

Grand Finale is a multi effect audio processing application designed for finalizing complete mixes, stems, voice overs, buses and/or individual audio tracks. The plug-in offers several modules in a pre-routed configuration. Each module has parameters to alter, and most modules offer a set of algorithms to select. These features come together to make Grand Finale a powerful tool for quickly finalizing a track, bus or mix.

Note! Grand Finale is a stand alone application and will only run on a 64 bit CPU. Supported devices are iPad Air (or later), iPhone 5S (or later), iPod Touch gen 6 (or later).

Usage:

Import audio from iTunes, AudioShare, or extract from a video in the camera roll. Audio can also be imported by using the “Open In..” option in any other app that can export audio.
Use the playback controls to start and stop playing, and alter the module knobs/options to change how the audio is processed. When satisfied with the result, tap Export to render and save the finalized audio file.

Included DSP Modules:

Main bus processing

• High Pass filter
• Compressor
• Multiband Compressor
• MS Stereo Tool
• Equalizer
• Limiter

Additive/parallel processing

• Compressor
• Distortion

Other features:

• Accurate RMS and LUFS metering (tap the meters to swap)
• 37 professionally made factory presets.
• Load / Save custom user presets
• Project manager (load / save full state including audio file data)
• User manual bundled inside app.
• Parallel processing is phase linear.
• Exports to WAV/AIFF/AAC at 16, 24 or 32 bits (sample rate is preserved)

Get Grand Finale

2017
09/01
SyndtSphere Synth By Klevgrand
Author View comments Tags Tags: , , , , ,

Klevgränd SyndtSphere. This synthesizer offers a brand new way of finding the optimal sound. By rotating a sphere that consists of more than 70 professionally created states anyone can dial in the perfect sound. In addition to the sphere, a ping-pong delay and a few more global settings are available.

SyndtSphere is based on the more traditional polyphonic synthesizer Syndt (also available on the App Store).

Features:

• AUv3 Compatible – use it as a plugin inside Garageband or any other AUv3 compatible host app.
• High quality internal audio engine.
• Stereo ping-pong delay
• Optional legato mode with glide speed setting.

Get SyndtSphere

2017
05/18
Klevgrand Syndt Synthesizer For iPad
Author View comments Tags Tags: , , , , ,

Syndt is a high quality polyphonic synthesizer with a lot of possibilities. The oscillator waveform can be morphed between pure sine to pure square and supports alternation of pulse width. Both the shape and pulse width can be modulated by two independent LFOs. Finetuned low pass and high pass filters combined with a separate filter attack setting (optionally based on velocity) makes possibilities to create some raw and interesting sounds.

The additional LFO can be shaped exactly as the oscillator, and optionally controls filters, gain and pitch (using a modulation wheel or just automatcally). This LFO can be synchronized to a AUv3 host.

Globally there’s a nice stereo chorus, ping pong stereo delay (that also can sync to a AUv3 hosts bpm) and EQ.

Key features:

* AUv3, works with AUv3 compatible hosts like GarageBand, Cubasis, Auria, AUM etc.
* 70 professionally made presets
* XY pad based oscillator and LFO (PWM on the X axis and morphs between sine and square on the Y axis)
* Independent mini-LFO (sine only) for each axis of the oscillator XY-pad.
* LP / HP filter with resonance
* LP Filter can be velocity sensitive
* LP Filter has an optional attack time
* LFO can affect LP filter, HP filter, gain level and pitch
* LFO has an optional attack time
* LFO can be syncronized with an AUv3 host (AUv3 mode only!)
* Ping pong stereo delay (optionally syncs to host)
* Stereo Chorus
* Three band EQ
* Legato mode with glide speed parameter
* Pitch bend range

Important: Syndt in stand-alone mode does not support IAA or MIDI. You can try it out using the keyboard at the bottom, but that’s it. We recommend using Syndt with AUv3 compatible hosts.

OBS! Syndt oversamples the signal and uses sophisticated DSP features which makes it consume quite some CPU. An iPad AIR 2 or better is recommended if you’re planning to use many voices simultaneously.

Get Syndt

2016
12/16
Pads Pad Synth Audio Unit For iOS and MAC
Author View comments Tags Tags: , , , , , , ,

Pads is basically a wavetable synthesizer with a noise/grain generator and a high cut filter. With a carefully developed ”wobbler” that detunes the waveforms and makes small inconsistencies to several internal parameters and a nice sounding chorus, this synthesizer is able to create some really interesting and non-statical pad sounds.

Noteworthy features:

• AUv3, works with AUv3 compatible hosts like GarageBand, Cubasis, Auria, AUM etc.

• 30 handcrafted presets created by professional musicians

• Filter, Attack and volume can be modulated by velocity

• Controllable grit/grain level, sampled from a real hammond organ with a broken tone wheel

• Controllable wobble factor that adds analogue unpredictability

Important: Pads in stand-alone mode does not support IAA, Audiobus or MIDI. You can try it out using the keyboard at the bottom, but that’s it. We recommend using Pads with AUv3 compatible hosts.

iPhone 6 or later is recommended.
iPad Air 1 or later is recommended.

Get Pads

2016
10/23
Klevgrand Tines Electric Piano For iOS
Author View comments Tags Tags: , , , , ,

tines-electric-piano-for-ios

Tines emulates an electric piano. With internal effects like a stereo tremolo, a multiband distortion panel and a subtle roomy reverb Tines can sound like anything between a dreamy slick Rhodes to a nasty Wurlitzer. A finetuned velocity curve makes it a joy to play Tines on an external keyboard.

tines

Features:

• AUv3, works with AUv3 compatible hosts like Garageband, Cubasis, AUM etc.
• Tremolo depth and speed (XY pad) with phase offset
• Variable decay time
• Variable Air (room) amount
• Multiband distortion

Note: Tines in stand-alone mode does not support IAA, Audiobus or MIDI. You can play it using the keys at the bottom, but that’s it. We recommend using Tines with AUv3 compatible hosts.

iPhone 6 or later is recommended. iPad 4 or later is recommended.

Tines

Tines from Klevgränd produktion on Vimeo.

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.

  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram

  • Dj Samples
    Soundtrack Loops
    Privacy Policies

  • Become a patron at Patreon!

  • Categories

  • Recent Posts

  • Tags

    app audiobus audio effect audio unit auv3 daw dj app drum app Drum Machine Garageband groovebox Guitar Effects IK Multimedia iOS iPad ipad app ipad daw ipad drum machine ipad groovebox ipad sampler ipad synth ipad synthesizer iPhone iphone app iphone synth iphone synthesizer iPod ipod touch app Klevgränd Korg looper looping app loops midi midi Controller midi sequencer music apps music production retronyms sampler sequencer synth Synth App synthesizer VirSyn

  • Archives