2018
06/06
StepPolyArp Unit AUv3
Author View comments Tags Tags: , , , , , , ,

StepPolyArp Unit is a real-time polyphonic and polyrhythmic MIDI step arpeggiator and step sequencer. It can be used as a standalone application or an Audio Unit MIDI effect plug-in.

The application and the plug-in can operate as a step arpeggiator by automatically generating melodic patterns from played notes or chords, or as a step sequencer that doesn’t require MIDI input to play.

Unlimited presets can be saved on a local device and synchronized to iCloud. Each preset contains 16 patterns, 5 customizable polyrhythmic step controllers, and a 32 steps event matrix with 11 polyphonic and polyrhythmic lines driving the arpeggiator engine.

The application supports full internal and external MIDI connections for input and output, Audiobus MIDI sender, MIDI filter routing, Ableton Link sync, and MIDI clock source sync. An internal sound bank is included.

The Audio Unit MIDI effect plug-in supports multiple instances. A compatible host is required to run the plug-in. The host needs to support the Audio Unit MIDI effect format.

Features:

• Standalone application and Audio Unit MIDI effect plug-in
• Arpeggiator and step sequencer mode
• 1 to 32 steps programmable matrix
• 11 configurable transposition lines
• Polyrhythmic lines
• 16 patterns by preset
• Automatic chaining patterns
• 8 octaves resizable keyboard
• Multitasking
• Sample-accurate timing
• Internal sound bank
• Tap tempo
• Receiving MIDI from external MIDI sources
• Receiving external MIDI sync (MIDI clock)
• Ableton Link support
• Internal routing of inputs, outputs, and MIDI sync
• Send MIDI to a virtual port that can be used as MIDI input by other “Core MIDI” compatible applications
• Default velocity, modulation, pan, volume, aftertouch, and pitch bend steps controller
• Customizable steps controller MIDI setup
• Arpeggiator and sequencer conform to the selected scale
• 6 arpeggiator modes
• 1 random mode
• 1 chord mode
• Random patterns creation
• Presets manager
• “Program Change” support
• Native iCloud support
• “Files” application support
• Full support of “Split View” and “Slide Over”
• 128 Undo / Redo levels
• Copy and paste
• Lockable keyboard (latch mode)

Compatible hosts supporting Audio Unit MIDI effect:

• Cubasis
• AUM

Supported MIDI connections:

• Virtual “Core MIDI” connections between applications
• iOS compatible MIDI interface
• MIDI over Wifi
• MIDI over Bluetooth
• Ableton Link (sync and transport)
• Audiobus (MIDI, transport, state saving)

Requirements:

An iPad or iPhone with iOS 11 or later

Get StepPolyArp Unit

2018
06/05
Voice Synth Now AUv3 Ver 5
Author View comments Tags Tags: , , , , , ,

Voice Synth is a professional live instrument to create incredible new voices, choirs, sounds and soundscapes, based on your own unique voice. Take a journey into sound design and discover the endless possibilities: Speak, sing, hum and beatbox in the mic, to turn your voice live into a baby or tenor, a popstar on AutoPitch, a robot from Cylon to iDalek, a church or close harmony choir, animals from birds to dogs and lions, musical instruments from organs, guitars and a groovy bass to percussions and rich 70’s vocoders, amazing effects and ambient, lush string/storm soundscapes.

To get you started, we included over 250 factory presets! Play and tweak with four 24-band live vocoders, live-pause your voice, AutoPitch, Audio Units V3, audio routing, midi, sampler, multiple voice harmony arranger, spectrum stroboscope, pitch and formant shifter, 24-band equalizer, distortion, delay, chorus and reverb, and a voice designer with oscilloscope. The free version of Voice Synth provides presets and functionality by in-app purchases with a free try-out.

Musicians, DJs, sound designers, voice artists: Voice Synth is a must-have in your audio toolbox! Voice Synth is available on the iOS and Mac App Store, and has a dedicated interface designed for iPad/Mac, and a compact interface for iPhone/iPod Touch that includes all features so you can create anywhere you go.

What’s New
Version History
Jun 5, 2018 Version 5.0

• Audio Units V3 for use in DAWs as instrument (sampler mode) and effect (live mode)
• New macOS version, preset compatible with iOS!
• iPhone X support
• Choose audio route (input & output on macOS, input only on iOS)
• Compatibility with output-only bluetooth speakers
• Connect directly with bluetooth midi devices (without need for a 3rd party app)
• Minor changes input/output gain trimming, mic thru on/off
• More than 50 new presets, total 250+

TECHNICAL SPECS
• Sound engine 2×32 bit at 44.1 kHz
• 24 voice polyphony
• Audio Unit V3, midi controllable instrument (sampler mode) and effect (live mode)
• Choose audio route (input & output on macOS, input only on iOS)
• All effects simultaneous, live, real-time, low-latency
• Midi
• Background audio (iOS)
• VoiceOver support (iOS only)
• iOS and macOS presets are interchangeable

• Live-pause-your-voice
• Repeater to prevent audio-feedback (when used live with built-in mic/speaker)
• Sampler to record/import/play/pause your voice, with zoom/loop/hold, speed ±800%
• Tapes to record/play/share/export your performance
• 250+ factory presets, unlimited user presets, import/export

• 4 vocoders with 24 bands, 5th order filters (Natural, Robot, Breath and Designer)
• Keyboard 1.5-2.5 octaves, hold on/off, mono/poly
• 49 registers to add voice brilliance, set a chord
• Arpeggiator with pattern/gate/speed/group keys & registers
• Equalizer with 24 bands and 10 presets (loudness, low-pass, telecom, etc)
• Pitch Shifter 8 octaves (e.g. for lion voice, tenor, gender change, child, baby, duck, squeak)
• Formant Shifter adapts voice spectrum ±1 octave (change headsize from child to giant)
• Adjustable pitch tracker
• AutoPitch (always sing in tune)
• Harmony synthesis of multiple voices in adjustable musical scale (choirs and rich 70’s vocoder sounds)
• Autogain, distortion, stereo panning, delay, chorus and reverb
• Slew rate: special vocoder reverb (plucked strings, wind, thunder, storms)
• Stroboscopic gate: special vocoder effect to sample and hold your voice spectrum
• Mic thru and Vocoder mix to add-in your unprocessed voice (e.g. for beat-boxing)
• Sync timing of sampler/arpeggiator/delay/strobo voice to create rhythms
• Noise gate, manual/automatic and frequency adaptive

Designer vocoder includes
• Real time oscilloscope, what you see is what you hear!
• Mix additive/maximum/multiplicative synthesis with phase adjustment
• Sine/square/triangle/sawtooth wave with adjustable frequency, harmonics, clipping, width, skew and slope
• Noise white/voiced, with adjustable filter and clipping (e.g. for shot noise)
• Test mode to design while bypassing your own voice

Get VoiceSynth

2018
06/02
Dervoco Vocoder Audio Unit
Author View comments Tags Tags: , , , , , , ,

vocoder audio unit for ios

DerVoco is a vintage vocoder emulation. DerVoco uses analog modelled components including filters, envelope followers and companders to create a warm vintage sound instead of digital techniques like FFT.

Features:

• AUv3 Audio Effect and Audio Music Effect, works in all AUv3 compatible hosts.
• Internal polyphonic VCO may be used as a carrier and can be controlled via MIDI, when plugin is loaded as AU MFx.
• A special “input mode” where the carrier and modulator signals are encoded as the left and right channels of a stereo input signal. In this mode any synth plugin (e.g. BeepStreet Zeeon) may be used as a carrier signal.
• 11 or 15 bands with on-screen equalizer.
• Controllable filter resonance continuously blends from smooth to sharp and ringing sound signature.
• Built in compressor and noise gate
• Optimised to the limits: 60 filters take 4% CPU on latest iPads.

Get DerVoco

2018
05/21
New Kronecker AUv3 Synthesizer IceWorks
Author View comments Tags Tags: , , , , , , ,

Kronecker is a synthesizer with a mechanism to make sounds many times like a rhythm machine each time you press a keyboard.

In addition to synchronizing the trigger speed to the tempo, you can gradually increase the speed or slow it down after pressing the key. This makes it possible to produce synthesizer sounds like bouncing balls and clockwork toys.

Kronecker has four emitters that emit sound particles made from FM tones and noise. At the emitter you can specify at what timing the sound particles will be triggered. You can also add effects such as the pitch and tone of particles gradually changing.

Particles emitted by the emitter can be processed with two resonators, and you can reproduce sounds like particles jumping on strings and pipes.

Kronecker works not only on the iPad but also on the iPhone. It also supports Audio Unit Extensions (AUv3), so you can plug in to AUv3 compatible host. For each screen size, different layouts are designed to be easy to use and intuitive.

## Key Features
* Universal App
Optimized for both the iPad and the iPhone.

* Audio Unit Extensions (AUv3)
You can use in a host application that supports Audio Unit such as GarageBand.

* Inter-App Audio
You can stream live audio directly to other Inter-App Audio host applications.

* Audiobus support
You can stream live audio directly to other Audiobus-compatible apps. See https://audiob.us for more information.

* Ableton Link
Ableton Link is a new technology that synchronizes beat, phase and tempo of Ableton Live and Link-enabled iOS apps over a wireless network. See https://www.ableton.com/link/ for more information.

* MIDI
– Core MIDI, Virtual MIDI, Inter-App Audio MIDI input
– MIDI Clock synchronization
– MIDI Controller Mapping

* Programmable Arpeggiator
You can easily create your own pattern.

Get Kronecker Synthesizer

2018
05/20
Harmonizer Audio Unit AUv3
Author View comments Tags Tags: , , , , , ,

Harmonizr is a vocal harmonizer offering a unique and fun user interface. You can sing a melody, setting the appropriate key centers, and Harmonizr will do the rest, giving 3 voices of automatic harmony. A preset mechanism allows you to change the harmonization, and an editor allows you to customize how you want to harmonize each type of key center (major, minor, and dominant). Harmonizr also supports MIDI input, both to detect key center, and to provide a mechanism for keyboard players to manually specify harmony. There is a 10-voice limit in manual harmonization, and it can be used in conjunction with the automatic voices to create a richer sound, with a total of 14 voices.

Get Harmonizr

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.

  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram

  • Dj Samples
    Soundtrack Loops
    Privacy Policies

  • Become a patron at Patreon!

  • Categories

  • Recent Posts

  • Tags

    app audiobus audio effect audio unit auv3 daw dj app drum app Drum Machine Garageband groovebox Guitar Effects IK Multimedia iOS iPad ipad app ipad daw ipad drum machine ipad groovebox ipad sampler ipad synth ipad synthesizer iPhone iphone app iphone synth iphone synthesizer iPod ipod touch app Klevgränd Korg looper looping app loops midi midi Controller midi sequencer music apps music production retronyms sampler sequencer synth Synth App synthesizer VirSyn

  • Archives