2020
02/13
JAX Unisonic Pitch Shifter
Author View comments Tags Tags: , , , , ,

JAX Unisonic

JAX Unisonic is a special Audio Unit, able to produce up to 8 additional voices from any audio input (also polyphonic audio) by multiplying and shifting it in pitch and other parameters. Audio Units require a host application for operation.

The concept of JAX Unisonic is loosely derived from ‘Unison’ which was adopted from the ancient analog synthesizer world, where manufacturers and sound designers intended to fatten the sound by multiplying and stacking available voices together. Also digital synthesizers did adopt this technique to fatten sound sources.

Due to the instability of analog oscillators and components and some wilful detuning, an interesting sonic effect is achieved, giving the produced tones significantly more presence and life. Unison voices are still excessively used in modern music styles today. (In classical music compositions ‘unisono’ basically means a performance, where multiple instruments or voices play the same parts in an ensemble fashion.)

Technical

Now JAX Unisonic can simulate this sonic effect with any audio source by incorporating a bank of independent time domain pitch shifters, that are optimized to detune and spread artificially multiplied voices in panorama. It can be understood as a kind of super chorus generator or an ensemble like effect with variable, realtime controlled intensity and pitch relation. But it is clearly something more.

With JAX Unisonic you can create up to 8 additional voices, that will be passed thru a chain of pitching and positioning, creating massively fattened sounds with any kind of voice input. Additionally you may transpose each voice individually per semitone to max. +/- 1 octave, something that cannot be achieved with usual choruses, unison or ensemble effects and moves the results slightly in the direction of the category “harmonizer” effects. Although the harmonic results can be programmed (automated) freely and are not auto generated in any way, as on some available other harmonizers.

The used pitch shifters in our JAX Unisonic are NOT based on the phase vocoder paradigm (FFT) and do not introduce the static latencies, which are unavoidable by the latter. A time domain pitch shifter in contradiction, uses very small delay buffers, where the latency is dynamically adjusted (dependent on the used pitch shifting amount) and much smaller and nearly latency-free. Such pitch shifters are better situated for live usage therefore. Although, such pitch shifters sound slightly more raw and tend to produce disharmonic overtones with more extreme values.

Usage

JAX Unisonic may be used as a massive unison effect generator or more decently for creating various, more subtile effects for improving sonic qualities of parts in a composition. For instance controlled voice detuning, manual pitch correction, doubling of vocals or solo instruments or just to give some boring voices more interest and static sound some special movement. It is even usable with drums, adding subtile or even massive new frequency components.

Get JAX Unisonic HERE

2020
02/13
Impulsation Convolution Reverb
Author View comments Tags Tags: , , , ,

Convolution reverb app for iPad

IMPULSation is an impulse response/convolution reverb that allows you to load in your own impulses for an an unlimited amount of neverb and amp possibilities. To give you an idea of the power of this app: There are literally hundreds of thousands of impulses freely available online and our app will load them all, given that it’s properly formatted in either .wav or .aif format. Say for example you have an electric piano sound that you want to run through a classic Fender™ AMP. You do a web search for “Fender AMP Impulses” and pick from the thousands of possibilities. You will literally spend hours upon hours freely downloading all of the available spaces, amps, reverbs, and/or delays to use within your favorite AUv3 DAW.

The technology of convolving and deconvolving is a method of putting in a signal through an amp, reverb unit, delay unit, or space and with sophisticated mathematical interpolations techniques, you can create a very close replica of the actual source. Our IMPULSation is specifically designed for AMPs, reverbs, delays, and spaces of which our code is optimized to detect which is being used. The detection allows us to optimize the signal for better CPU and for optimal sound.

Impulsation Reverb iPad

As with all of our other apps, our goal is always simplicity with power. We give you all the important features needed for a great sound, without being too complex. The features are as follows:

General Features:

– AUv3
– AAX
– 88 Factory Presets
– The ability to load in your own impulses using the iOS files app (Works With External Drives via iPadOS)
– MIDI Learn parameter

**SPECIAL NOTE: Importing works by selecting a folder with .aif or .wav files in it and all of the files will be imported from that folder.

App Controls:

– Pre-Delay
– Wet Controls with Range control for precise scaling
– Dry Controls
– Decay Controls
– Waveform View
– Stereo Widener that enhances pre-stereo signals
– Master Output

Includes Over 200 Impulses from very popular vintage reverb units:

– LEX200
– LEX480X
– RLND RE201
– RLND DEP3 Echo
– EMT 244
– NBA Lush
– ASR-10/DP4
– Exotic Places
– Special FX

——-

ATTENTION iFX Rack Users:

1. The default reverbs are the ones from the FantasyVerb

2. We will be offering a paid IAP option to import impulses.

Get Impulsation HERE

2020
02/13
Hammond B-3X For iPad
Author View comments Tags Tags: , , , ,

IK Multimedia Hammond B-3X

Hammond B-3X is a next-level tonewheel organ app that gives you incredibly realistic sound & features. We’ve partnered with the Hammond Organ Company and Suzuki Musical Instruments to create the most immersive, authentic and powerful B-3 experience for use live on stage or as a plug-in inside recording apps.

The sound starts with 91 free-running tonewheels, based on meticulously-maintained real organs, and mixes those in real-time based on the notes played and the drawbar levels. Our advanced modeling recreates the tonal filtering, key click, percussion and chorus-vibrato circuits to recreate the organic feel of the real instrument and give you deep control over every element of the sound.

The organ feeds a 5-unit STOMPS section with overdrive, graphic EQ, chorus-vibrato, wah and spring reverb pedals to recreate the widest range of iconic sounds.

The CABS section gives you the choice of 5 Leslie amps and 7 speakers with control over speed, acceleration/deceleration, mic placement, gain, EQ and volume. For rock & blues, add the parallel guitar amp into the mix with two models from AmpliTube, with full tone-shaping controls and spring reverb.

A mixer lets you blend the sound of the Leslie, the parallel guitar amp and DI organ sound. 3 studio effects post-mixer let you put a final polish on your tone.

For live use, a “Controls” view hides the keyboard and enlarges the drawbars and switches for less distraction while playing. And there’s included MIDI assignments for controllers and Hammond digital organs, making it plug-and-play easy to perform.

Hammond B-3X for iPad also supports the latest Audio Units plug-in format, letting you use it inside all the most popular recording apps.

Features

-The first official Hammond B-3 virtual instrument
-Designed in cooperation with Hammond Organ Company
-Edit tonewheel model, leakage, key click, percussion & chorus controls
-24 custom drawbar settings available per preset
-Official Leslie speaker with 7 amps and 5 cabinets
-Parallel guitar amp with 2 amp models and 4×12 cabinet
-5-effect stompbox pedalboard for ultra-flexible tonal shaping
-3-effect studio post FX section for final polish
-Controls-only view for live or session use

-MIDI program change preset assignments
-Assignable MIDI for use with external controllers
-AUv3 compatibility for use inside recording apps

Get Hammond B-3X HERE

2020
02/13
Eventide Qvox iOS AU
Author View comments Tags Tags: , , , ,

QVox is a creative audio effect that transforms vocals, guitars, drums, and synths into four independent voices. Create beautiful harmonies, widen instruments and design groovy rhythmic sequences with diatonic pitch shifting and delay. You can choose the key, scale, and each voice’s pitch and delay interval, with the ability to alter any parameters in real-time using the Ribbon controller.

Features:

– Four independent voices (labeled as A, B, C, D) with diatonic pitch shifting and delay
– Select Key and Scale to create harmonies that coincide with your compositions or use the Learn button to set the key by the incoming note you play
– Group the four delays so that they are evenly spaced or spread out
– Sync the delays to tempo, or a value of your own choosing
– The Ribbon controller allows for dynamic modification of several knobs at once to easily morph between settings
– Factory presets help get you started or create your own User presets
– Mixlock helps when auditioning different presets by enabling a global Mix value that will remain constant for every subsequently loaded preset
– Works as a standalone app, AudioUnit v3 effect, or Inter-App Audio effect

Get Eventide Qvox HERE

2020
02/13
L7 Looper AUv3
Author View comments Tags Tags: , , , , ,

Looper App For iOS

— LIMITED TIME 50% OFF (REGULAR $19.99) —

L7 is the ultimate AUv3 live looper for iOS. Inspired by the Roland Boss RC-505 Loop Station, L7 packs dozens of features previously only found in professional hardware loopers into a sleek, easy to use package with virtually unlimited creative potential.

– Use it as a standalone or an AUv3 plugin
– Record up to 16 tracks
– 9 effects per track + master effects & input effects
– Pan
– Reverse
– Reverb
– Tremolo
– Tempo delay
– Pitch shift (± 12 semitones)
– Comb filter
– High pass filter
– Low pass filter
– Voicetune with 144 different

scales, control amount & speed

– Automatically trigger effect changes hands-free
– Variable loop length with auto-stop
– Mute / unmute individual sections of a track
– Mute / solo buttons for each track
– Overdub tracks
– Save sessions and export to your favorite DAW
– Import audio from any file format (wav, mp3, aiff, m4a, etc.)
– Audiobus compatible
– Sync with other apps using Ableton Link
– Works with most USB audio interfaces
– Best with wired headphones

Get L7 HERE

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Become a patron at Patreon!
  • Categories

  • Recent Posts

  • Tags

  • Archives