2022
08/22
Echo B2 Italian Echo for iPad
Author View comments Tags Tags: , , ,
The classic italian tube echo machine in your iPad

The classic italian tube echo machine in your iPad

The classic italian tube echo machine in your iPad

PLEASE NOTE: This is a AUv3 plugin, use it with a compatible host App.

GSi ECHO B2 is the digital recreation of a particular unit of Binson Echorec mod. T5E that, despite being more than 50 years old, still has its original tubes and has had very little service in the last 30 years. We don’t know how this unit sounded when it was new, but this is how it sounds today, in 2022.

Echo B2 echo app

Echo B2 echo app

The plugin features all controls found on the original unit, plus 4 extra knobs for adjusting the alignment of each head (aka Azimuth on tape machines), one extra knob to slow down the drum motor up to half the normal speed (to obtain doubled delay times) and one last knob to adjust the level of audible circuit hiss.

All parameters can be Midi controllable. All Midi CC numbers can be freely assigned.

Works with all major AUv3 hosts, including Camelot, AUM and Garage Band.

Can be used standalone with an external audio interface.

Get Echo B2 HERE https://apps.apple.com/us/app/echo-b2/id1640987290

2022
08/22
Free Acoustic Drums FAC Drumkit
Author View comments Tags Tags: , , , ,
FAC Drumkit

FAC Drumkit

Hello friends! We sampled a real Gretsch 135th anniversary kit and formatted it for FAC Drumkit and it’s yours to use free in your tunes. Check out Doug’s demo of my kit here:

Here is the link to the kit in Patchstorage https://patchstorage.com/platform/fac-drumkit/

You can get FAC Drumkit here at the App Store https://apps.apple.com/gb/app/fac-drumkit/id1552568814

2022
08/22
VAPoly synth for iOS
Author View comments Tags Tags: , , ,
Polyphonic Synth for iOS

Polyphonic Synth for iOS

*** VAPoly Introduction Sale until Aug. 31 (Regular price $14.99) ***

VAPoly is a virtual analog 8 voice polyphonic synthesizer for iPhone, iPad and Mac. VAPoly features built-in effects, built-in sequencer, parameter automation and oscilloscopes. VAPoly can be used as a stand alone or as an Audio Unit Extension (AUv3). Stand Alone supports Ableton Link, Bluetooth MIDI, MIDI IN/OUT and audio file export.

The synth features two oscillators, two ADSR envelopes, a high pass filter, a low pass filter and an amplifier per voice. The oscillators are capable of wide variety of modulation to shape the sound. The low pass filter is modeled on cascaded OTA filter circuit for classic analog sound. The Effects include delay, chorus, flanger, reverb, eq, and compressor. The sequencer allows you to program 16 bar pattern per clip and you can have total 16 clips.

Project files can be saved in iCloud Drive, so that you can work on a project on iPhone, iPad or Mac whichever is convenient for you at the time.

VAPoly synth for iOS

VAPoly synth for iOS

Main Features

Virtual analog 8 voice polyphonic synthesizer

Sequencer

16 bar patterns per clip. Total 16 clips.
Parameter automation.

Audio Export

Linear PCM format (AIFF, WAV and CAF) and compressed format (AAC)

Support iCloud Drive.
Support Ableton Link, Bluetooth MIDI, MIDI In / Out.
Support Audio Unit Extension (AUv3)
Works on iPhone, iPad and Mac.

System Requirements
– AudioUnit Extension (AUv3) requires host application which support AudioUnit Extension.
– AudioUnit Extension (AUv3) is supported by Apple Garage Band on iOS and macOS, and Apple Logic on Mac. For any other DAW, it depends on the application and some of them don’t support AudioUnit Extension (AUv3).

Get VA Poly HERE https://apps.apple.com/us/app/vapoly/id1630490210?platform=ipad

2022
08/22
Red Rock Sound CL1 Compressor
Author View comments Tags Tags: , , , , , ,
Soviet Compressor for iOS

Soviet Compressor for iOS

Red Rock Sound CL1 is stereo and mono audio signal dynamic range compressor. CL1 compressor has distinctive sound allowing its usage not only for technical purpose of dynamic range compression but also for artistic sound coloration, which happens due to usage of saturation with even harmonics, dithering that gives effect of «air» and oversampling with non-linear phase response that gives effect of «depth».

CL1 compressor besides main dynamic range compression module also contains limiting module («limiter»), which allows controlling peaks passing through the compressor, mid-range equalizer module doing ISO-226 curves equalization and input signal or gain reduction VU-meter with lamp indicator for limiter operation control. CL1 compressor has adjustable high-pass filter for side-chain signal, also supports «parallel» compression and M/S operational mode.

FEATURES

Two different attack modes: «fast» and «slow»;
Softness of compressor characteristics control;
6 operation modes: double mono, mono with external side-chain signal, mid channel, side channel, M/S, linked stereo;
Mid-range equalizer and Side-chain signal high-pass filter;
Pre- or Post-Limiter;
Attack and Release times multiplier;
Internal Dithering;
Parallel compression;
8x oversampling and 64-bit floating point processing;
External Side-chain.
ATTACK MODE

Red Rock Sound CL1

Red Rock Sound CL1

In «Fast» mode when control signal reaches Threshold the compressor immediately and very fast starts to lower the signal level slowing down by exponential law;
In «Slow» mode the compressor in the same situation starts gain reduction very slowly thus most attack of the signal passes through.
MID SCOOP

The built-in mid-frequencies equalizer is based on mid-frequency range equal loudness curves design and can be used as another tool to position instruments, with ability to highlight backside elements or to add a bit density to frontal elements and move them back at the same time.
CL1 developed on the basis of «МОЛОТ» compressor by Vladislav Goncharov.

RRS CL1 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the CL1 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of CL1 AUv3 plug-in comes as In-App Purchase.

To use CL1 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — CL1 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.

Get Red Rock Sound CL1 HERE https://redrocksound.pro/products/cl1-au/

2022
07/17
Sound Test Room Live Demo Today
Author View comments Tags

UK based Doug Woods (The Sound Test Room) will be doing a live review / demo with some of our ambient packs today at 12pm PST 8 PM UK time. Stoked for this!! Hope you can tune in!!

Using sounds from www.soundtrackloops.com

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Become a patron at Patreon!
  • Categories

  • Recent Posts

  • Tags

  • Archives