Modley is a modulation delay with effect insert capabilities, which lets you design the whole delay signal with several carefully selected effect modules, to create customized signal flows and unique sounds.
The three effect racks provide insert slots for different stages of the processing.
Pre rack
Applies effects before the delay loop.
Loop rack
Applies effects to the delay loop. Those effects will be applied to the input signal each delay bounce.
Post rack
Effects after the delay delay loop.
Available FX inserts
• Panner – Auto panning effect.
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – Low cut, high cut and two shelf filters
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Multiband Gate – Four band spectral gate
• Pitcher – Pitch shifting effect
• Filter – Classic resonant low and highpass filter
Full documentation available inside the app or at https://klevgrand.se/downloads/modley-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! Modley consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
Modley is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and effects slots. These modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms.
The amp module offers 12 different amplifier profiles. It has both a clean mode and a overdrive mode, an equalizer functionality (including presence), and a booster controlling the end stage amplification saturation.
Cabinet simulation consists of 10 different cabinets of various sizes and sound. This module also offers a stereo width knob that simulates the distance between two microphones put in front of the cone.
Room simulation offers 6 different kinds of rooms, where each room size can be changed between Small, Medium and Large. There’s also a decay parameter controlling reflectivity of the walls and a dry/wet mix.
The pedal board contains 4 slots where any of the 14 effects can be inserted. The order of the pedals can easily be changed using drag and drop.
STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and effects slots. These modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms.
The amp module offers 12 different amplifier profiles. It has both a clean mode and a overdrive mode, an equalizer functionality (including presence), and a booster controlling the end stage amplification saturation.
Cabinet simulation consists of 10 different cabinets of various sizes and sound. This module also offers a stereo width knob that simulates the distance between two microphones put in front of the cone.
Room simulation offers 6 different kinds of rooms, where each room size can be changed between Small, Medium and Large. There’s also a decay parameter controlling reflectivity of the walls and a dry/wet mix.
The pedal board contains 4 slots where any of the 14 effects can be inserted. The order of the pedals can easily be changed using drag and drop.
Available amps
• American Guitar 1 – An edgy amp that rounds of nicely at the top
• American Guitar 2 – Similar to American Guitar 1, but with some more presence
• British Guitar A 1 – Gives a full sound with crisp
• British Guitar A 2 – Similar to British Guitar A 1, but with more body
• British Guitar B 1 – A slightly saturated amp with nice character in the high mids
• British Guitar B 2 – Is just like British Guitar B 1 a bit saturated, but with a more linear frequency response
• Vintage Guitar – Gives that perfect thickness when playing jazz and soul
• General Tube Amp – Low saturation with a fairly linear frequency response
• Garage Sale Amp – Limited frequency response and saturates. The obvious LoFi choice
• American Bass – A versatile pro bass amp
• British Bass – Works fine for more edgy bass playing
• Vintage Bass – Perfect for soul/jazz/RnB
Available cabinets
• Wide Small – Small speakers, lots of resonances
• Tight Small – Small single speakers, few resonances
• Wide Combo – Medium speakers, lots of resonances
• Tight Combo – Medium speakers, few resonances
• Wide Normal – Medium speakers, moderate resonances
• Tight Large – Full range speakers, few resonances
• Wide Large – Full range speakers, lots of resonances
• Radiola – Small (broken) speakers, moderate resonances
• Bass – Low end speaker/Medium speakers, few resonances
• Passthrough – Full range speakers, no resonances
Available ambiences
• Normal – A good sounding recording room
• Dark – A room that gives attenuated high frequencies
• Bright – More significant reflections at higher frequencies
• Cold – A room with attenuated low frequencies
• Warm – Gives a livingroom:ish sound
• Boomy – Loud and lots of resonances
Available FX pedals
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – 6 band peak filter with fixed frequencies
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Distortion+ – Complex distortion pedal with optional distortion algorithms
• Gate – Simple gate
• Multiband Gate – Four band spectral gate
There are also about 100 predefined factory presets covering most scenarios.
Full documentation available inside the app or at https://klevgrand.se/downloads/stark-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! STARK consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
STARK is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
Available amps
• American Guitar 1 – An edgy amp that rounds of nicely at the top
• American Guitar 2 – Similar to American Guitar 1, but with some more presence
• British Guitar A 1 – Gives a full sound with crisp
• British Guitar A 2 – Similar to British Guitar A 1, but with more body
• British Guitar B 1 – A slightly saturated amp with nice character in the high mids
• British Guitar B 2 – Is just like British Guitar B 1 a bit saturated, but with a more linear frequency response
• Vintage Guitar – Gives that perfect thickness when playing jazz and soul
• General Tube Amp – Low saturation with a fairly linear frequency response
• Garage Sale Amp – Limited frequency response and saturates. The obvious LoFi choice
• American Bass – A versatile pro bass amp
• British Bass – Works fine for more edgy bass playing
• Vintage Bass – Perfect for soul/jazz/RnB
Available cabinets
• Wide Small – Small speakers, lots of resonances
• Tight Small – Small single speakers, few resonances
• Wide Combo – Medium speakers, lots of resonances
• Tight Combo – Medium speakers, few resonances
• Wide Normal – Medium speakers, moderate resonances
• Tight Large – Full range speakers, few resonances
• Wide Large – Full range speakers, lots of resonances
• Radiola – Small (broken) speakers, moderate resonances
• Bass – Low end speaker/Medium speakers, few resonances
• Passthrough – Full range speakers, no resonances
Available ambiences
• Normal – A good sounding recording room
• Dark – A room that gives attenuated high frequencies
• Bright – More significant reflections at higher frequencies
• Cold – A room with attenuated low frequencies
• Warm – Gives a livingroom:ish sound
• Boomy – Loud and lots of resonances
Available FX pedals
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – 6 band peak filter with fixed frequencies
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Distortion+ – Complex distortion pedal with optional distortion algorithms
• Gate – Simple gate
• Multiband Gate – Four band spectral gate
There are also about 100 predefined factory presets covering most scenarios.
Full documentation available inside the app or at https://klevgrand.se/downloads/stark-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! STARK consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
STARK is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
Degrader is a combined resampler and bit crusher AUv3 plugin. It can be used to simulate the sound of vintage digital gear, as a lofi-effect or as a plain distortion unit. Since all parameters are fully automatable it’s a handy plugin for creating unique and interesting drops, sweeps and other transitions.
It also comes with a handful of factory presets.
Features:
• Resamples between 250 Hz and 96 kHz.
• Low pass filter with different characteristics both pre and post resampling.
• Bit depth can continuously be altered between 3 and 24 bits.
• Additional distortion algorithm.
• Parameter linking (control several parameters with one knob)
• Input and output gain control.
• Dry / Wet mix.
• Several factory presets simulating different vintage gear.
Full documentation available inside the app or at https://klevgrand.se/download/degrader-docs/
NOTE! Degrader is a AUv3 plugin that only works in a AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
GoToEQ is a Pultec inspired EQ audio unit. Shape your sound with advanced equalising to make your tracks fit in the mix. Attenuate annoying resonances without destroying the overall sound. Boost the bass and still keep the peak levels tamed. Find and boost those silky top treble frequencies without the nastiness. Max out the middy dirt while keeping it musical and fit in the mix. Put the final touch on a complete song. GotoEQ is an equaliser made for the professional music producer, beat maker or sound designer.
Features:
• Low Shelf pultec style filter
• High Shelf pultec style filter
• Two parametric dynamic filters
• High pass filter
• Peak metering
• Input / Output gain
• Separate bypass on each filter
Hello every body this is Jason Donnelly aka Dj Puzzle reporting for my website ipadloops.com and today I’m going to show you two cool new effects. Both effects emulate an old cassette tape meaning they can make your brand new sparkling mix sound like it was playing back on an old broken down tape player. On one hand we have Fly Tape by MSXII and the other DAW Cassette by Klevgrand. They are both unique in their own way and they were both released just recently within the past couple of weeeks so I wanted to do a sort of comparison review for both in one video. Now I noticed a lot of the demos for these apps show the app on a master buss affecting the whole mix so I wanted to demo them as an insert effect on a single track. In this case a midi track using an AU instrument.
*I should add “Head Quality” in DAW Cassette is the LoFi effect in that one I kinda rushed over it and skipped that info.
iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle).
You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
As an Amazon Associate I earn from qualifying purchases.
