Nembrini Audio JMP Pro Guitar Amplifier plugin is based on a Marshall JMP1* preamplifier.
JMP Pro Valve Amplifier drives pure tone into each of its four uniquely voiced channels OD1, OD2, Clean1 and Clean2
OD1: This channel’s smoldering power will take you from the molten gold of a classic British sound, to searing metal and all points in between.
OD2: Tightly focused, high gain is served up here by the truckload. Modern and aggressive, yet fluid and toneful. This channel has all the distortion and sustain you’ll ever need.
Clean1: It is perfect for warm full-bodied chords, fat clean lead passages and jazz tones.
Clean2: It has the glassy edge of a classic British sound for those bright, jangly tones.
JMP Pro Nembrini
POWER AMPLIFIER
Powered by four EL34 virtual tubes with presence, volume and power switch in class AB push-pull configuration.
DIGITAL DELAY
FILTER make the delay Lo-Fi and OFFSET create a time offset in left/right delay sections
ANALOG MODULATIONS
select Chorus or Tremolo modulation
AMBIENT REVERB
Hall reverb algorithm
FILTERS CLEANER
Low and High cut filters PRE and POST amplifier
ANALOG NOISE GATE
tuned for guitar and bass
STUDIO COMPRESSOR
keep your dynamics in check, whether just thickening the sound or keeping levels consistent
Works as a standalone app, AudioUnit v3 effect, or Inter-App Audio effect.
STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and effects slots. These modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms.
The amp module offers 12 different amplifier profiles. It has both a clean mode and a overdrive mode, an equalizer functionality (including presence), and a booster controlling the end stage amplification saturation.
Cabinet simulation consists of 10 different cabinets of various sizes and sound. This module also offers a stereo width knob that simulates the distance between two microphones put in front of the cone.
Room simulation offers 6 different kinds of rooms, where each room size can be changed between Small, Medium and Large. There’s also a decay parameter controlling reflectivity of the walls and a dry/wet mix.
The pedal board contains 4 slots where any of the 14 effects can be inserted. The order of the pedals can easily be changed using drag and drop.
STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and effects slots. These modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms.
The amp module offers 12 different amplifier profiles. It has both a clean mode and a overdrive mode, an equalizer functionality (including presence), and a booster controlling the end stage amplification saturation.
Cabinet simulation consists of 10 different cabinets of various sizes and sound. This module also offers a stereo width knob that simulates the distance between two microphones put in front of the cone.
Room simulation offers 6 different kinds of rooms, where each room size can be changed between Small, Medium and Large. There’s also a decay parameter controlling reflectivity of the walls and a dry/wet mix.
The pedal board contains 4 slots where any of the 14 effects can be inserted. The order of the pedals can easily be changed using drag and drop.
Available amps
• American Guitar 1 – An edgy amp that rounds of nicely at the top
• American Guitar 2 – Similar to American Guitar 1, but with some more presence
• British Guitar A 1 – Gives a full sound with crisp
• British Guitar A 2 – Similar to British Guitar A 1, but with more body
• British Guitar B 1 – A slightly saturated amp with nice character in the high mids
• British Guitar B 2 – Is just like British Guitar B 1 a bit saturated, but with a more linear frequency response
• Vintage Guitar – Gives that perfect thickness when playing jazz and soul
• General Tube Amp – Low saturation with a fairly linear frequency response
• Garage Sale Amp – Limited frequency response and saturates. The obvious LoFi choice
• American Bass – A versatile pro bass amp
• British Bass – Works fine for more edgy bass playing
• Vintage Bass – Perfect for soul/jazz/RnB
Available cabinets
• Wide Small – Small speakers, lots of resonances
• Tight Small – Small single speakers, few resonances
• Wide Combo – Medium speakers, lots of resonances
• Tight Combo – Medium speakers, few resonances
• Wide Normal – Medium speakers, moderate resonances
• Tight Large – Full range speakers, few resonances
• Wide Large – Full range speakers, lots of resonances
• Radiola – Small (broken) speakers, moderate resonances
• Bass – Low end speaker/Medium speakers, few resonances
• Passthrough – Full range speakers, no resonances
Available ambiences
• Normal – A good sounding recording room
• Dark – A room that gives attenuated high frequencies
• Bright – More significant reflections at higher frequencies
• Cold – A room with attenuated low frequencies
• Warm – Gives a livingroom:ish sound
• Boomy – Loud and lots of resonances
Available FX pedals
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – 6 band peak filter with fixed frequencies
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Distortion+ – Complex distortion pedal with optional distortion algorithms
• Gate – Simple gate
• Multiband Gate – Four band spectral gate
There are also about 100 predefined factory presets covering most scenarios.
Full documentation available inside the app or at https://klevgrand.se/downloads/stark-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! STARK consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
STARK is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
Available amps
• American Guitar 1 – An edgy amp that rounds of nicely at the top
• American Guitar 2 – Similar to American Guitar 1, but with some more presence
• British Guitar A 1 – Gives a full sound with crisp
• British Guitar A 2 – Similar to British Guitar A 1, but with more body
• British Guitar B 1 – A slightly saturated amp with nice character in the high mids
• British Guitar B 2 – Is just like British Guitar B 1 a bit saturated, but with a more linear frequency response
• Vintage Guitar – Gives that perfect thickness when playing jazz and soul
• General Tube Amp – Low saturation with a fairly linear frequency response
• Garage Sale Amp – Limited frequency response and saturates. The obvious LoFi choice
• American Bass – A versatile pro bass amp
• British Bass – Works fine for more edgy bass playing
• Vintage Bass – Perfect for soul/jazz/RnB
Available cabinets
• Wide Small – Small speakers, lots of resonances
• Tight Small – Small single speakers, few resonances
• Wide Combo – Medium speakers, lots of resonances
• Tight Combo – Medium speakers, few resonances
• Wide Normal – Medium speakers, moderate resonances
• Tight Large – Full range speakers, few resonances
• Wide Large – Full range speakers, lots of resonances
• Radiola – Small (broken) speakers, moderate resonances
• Bass – Low end speaker/Medium speakers, few resonances
• Passthrough – Full range speakers, no resonances
Available ambiences
• Normal – A good sounding recording room
• Dark – A room that gives attenuated high frequencies
• Bright – More significant reflections at higher frequencies
• Cold – A room with attenuated low frequencies
• Warm – Gives a livingroom:ish sound
• Boomy – Loud and lots of resonances
Available FX pedals
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – 6 band peak filter with fixed frequencies
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Distortion+ – Complex distortion pedal with optional distortion algorithms
• Gate – Simple gate
• Multiband Gate – Four band spectral gate
There are also about 100 predefined factory presets covering most scenarios.
Full documentation available inside the app or at https://klevgrand.se/downloads/stark-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! STARK consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
STARK is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
BIAS FX turns your iPad into a world-class, guitar amp-and-effects processor. It gives you an endless collection of insanely great-sounding guitar pedalboards, ultra-high definition stereo rack effects, dual amps and dual signal chain. You can share and download users and artists signature guitar pedalboards from the cloud.
All new advanced multi-effects engine
Positive Grid’s approach engineering BIAS FX with a no-compromise mindset, from a detailed touch in distortion emulation to the double precision algorithm in chorus, we strive for the best possible sound quality. A huge collection of newly developed, high-definition pedal and rack effects are included: gate, boosters, overdrive, distortion, fuzz, equalizers, tremolo, phaser, flanger, chorus, octaver, compressors, delays, spring and plate reverbs—everything a guitar player needs for massive tone, with all the flavor of both modern and vintage stomp boxes. Throw all that together – it is pedalboard heaven, but without the hassle of hauling around dozens of stomps in a heavy metal box and fumbling with a snakepit of cables. Show up at the studio or gig, boot up and play!
Insanely powerful, yet easy to use
BIAS FX is the most powerful processor ever designed by Positive Grid, yet its simple drag-and-drop interface makes it extremely easy to use. Dual amps provide the resonance and vibrancy of playing through two real amps set up together in wide stereo. When integrated with BIAS AMP (separate app), you can select a different preamp, power amp, cab, mic and eq for each of the two amps. Patch everything together, including all pedals and rack effects, in any order you wish in dual signal paths running in parallel.
Download pedalboard from the cloud
There are already hundreds of pedalboard configurations available on ToneCloud for you to own, and the banquet keeps getting bigger and bigger: Positive Grid are currently working with professional artists, producers, and engineers from all over the world to create a massive, ever-growing library of extraordinary virtual pedalboards and rigs for BIAS FX. Browsing and downloading from that library is a snap: All the effects and amps in each setup can be seen at a glance, because they’re stored as Pedalboard-like snapshots. Simply scroll through the online images to select the presets of interest, then tap or click to download.
Inter app audio routing engine
BIAS FX integrates a brand new inter-app audio routing engine, you can easily insert any Inter-App-Audio compatible audio apps in BIAS FX’s dual signal paths, just like connecting audio effects app with virtual cables. BIAS FX makes it easy to go nuts with your audio apps.
Key features:
– Extremely intuitive operation
– Unrivalled, component-level simulation, analog-like sound quality
– 12 classic BIAS amps, import any amp models from BIAS AMP
– 25 high-quality effect pedals with brand new sound-processing algorithms
– 5 ultra-professional rack processors that sound like high-end analog gear
– Full integration with BIAS AMP gives you unprecedented control over designing your own fully customized amps
– Dual signal path and dual amp processing
– Brand new splitter switches between and combines dual signal paths, adjusting the level and frequency range for each path to give you more tone-shaping possibilities
– Live View mode lets you recall any preset with a single tap and toggle on/off any single effect or category of effects
– Pedalboard View shows all the effects and amps in the currently loaded preset at once
– Global Settings optimizes BIAS FX’s output to sound the best in any environment—including sending to a mixer, amp head or combo or stack power amp—by letting you EQ and selectively deactivate the app’s preamp, tone stack, power amp and cab separately for each destination.
– Inter app audio routing engine lets you insert other compatible audio apps in any place in your BIAS FX signal path
ToneStack is the ultimate in signal processing: with the largest variety of amps & FX, the latest advancements in modeling technology, and an unbelievably powerful yet simple interface – it simply shreds all the other guys.
Thanks to ToneStack’s state-of-the-art “Virtual Circuit” technology, each ToneStack unit is the digital mirror image of a real analog topology. Unlike other FX apps that try to copycat with EQing and other gimmicks, ToneStack recreates the intricate designs of the real thing. The result is a warm, responsive tone with the natural behavior you find in analog units.
Amazing Selection of Pro Amps & FX
ToneStack offers a huge range of amps, cabs & FX: from sparkly clean to sizzling hot bias tube amps, iconic stompboxes, pro-grade rack units, and high-end reverbs, ToneStack the most complete plugin suite on the iOS.
Right away, enjoy 6 classic amps & cabs, and 21 meticulously designed FX. Expand to a total of 24 amps & cabs, and 71 FX – the largest collection on iOS.
ToneStack also brings many powerful guitar FX to the iOS for the first time: polyphonic octaver, harmonizer, realistic spring reverbs, virtual-reel tape delays are just a few examples.
The Most Versatile Signal Chain on iOS
Why be limited with just 4 or 8 FX that other guys max you out at? ToneStack lets you run a whopping 64 amps & effects simultaneously* so you can let your imagination run wild.
For even more power, ToneStack includes a unique ABY unit not found in other FX apps. Split your signal anywhere: run dual amp setups, switch or blend FX chains, or multiplex your signal via frequency splitting – countless permutations, all up to you.
You can match any amp with any cab (all cabs have 3 mics with distance & position settings); you can insert any unit anywhere – even between amps and cabs like a true FX loop. Managing your signal chain is as easy as dragging and dropping an icon!
inSTUDIO & Other Goodies
Wanna quickly jam up an idea, or cut a song and share it? ToneStack offers a powerful 8-Track recorder – first two tracks free — with plenty of user-friendly features. Fire up the built-in Tapedeck to quickly record an idea or create loops, or manipulate audio with its Hi-Q pitch & time shift. Import & export audio via email, WiFi, iTunes or copy/paste. Built-in tuner, metronome and a custom onSTAGE mode are just a few other amazing ToneStack features.
All the Pro Features of iOS
Enjoy the full power of the platform’s top MIDI and Preset systems. MIDI learn is super-intuitive thanks to ToneStack’s WYSIWYG interface: all the amp & FX controls are MIDI-programmable. Effortlessly create UNLIMITED banks and presets – share them at the touch of a button. ToneStack is an Inter-App Audio effect, and works in any Audiobus slot.
Highlights
• “Virtual Circuit” amp & FX modeling technology
• Units modeled after real-life circuits
• ABY: split signal anywhere, use dual amp setups, blend, pan or switch FX chains & more
• Complete collection: 24 amps & cabs, 71 FX, with stompboxes & rack-units and more!
• 64 simultaneous amps & FX*
• Independent amps & cabs
• 3 mics per cab w/ distance & position setting
• 8-Track recorder w/ 2 tracks free
• Tapedeck w/ punch looping, sample-accurate rec, pitch/time manipulation, FX send & more
• Tuner w/ permanent & fullscreen modes
• Metronome, tap tempo, settable time signature
• BPM sync mods & LFOs
• onSTAGE mode w/ quick preset load & FX toggle
• Extremely powerful MIDI: control any amp or FX parameter
• Easy MIDI Learn
• MIDI prog changes + bank & preset up/down
• Audiobus: input, FX, output, state-saving
• Inter-App Audio FX
• Audio copy/paste, email, WiFi, iTunes sharing
Hardware
• Works with iOS compatible USB or headphone jack interfaces (USB recommended for best audio quality)
• Requires iPad 2, iPhone 4S, iPod Touch 5 or newer
The Mobile In digital input interface features pro-quality audio specs for guitar tones that are exceptionally rich and clear. It supports up to 24-bit/48 kHz digital audio and its guitar input features 110 dB dynamic range. Use Mobile In with your other CoreAudio guitar apps and hear how much better they sound!
Use Mobile In with GarageBand® for iPad® and other CoreAudio apps.
Mobile In is the perfect guitar interface for GarageBand® for iPad®. Recording guitar tracks with Mobile In means every take is a keeper, not a “scratch track” – you won’t have to record them over again to get better sound. Transfer tracks recorded with Mobile In straight to your DAW and keep the music going.
Mobile In™ interface specs
1/8-inch guitar input (110 dB dynamic range)
1/8-inch stereo line input (98 dB dynamic range)
Up to 24-bit/48 kHz digital audio support
Connects to the 30-pin digital connector in compatible Apple® devices
Compatible with Apple® iPhone® 4, iPad® 2 and iPad®
No batteries required – powered by the Apple® device
Includes high-quality 6-foot guitar cable with 1/8-inch and 1/4-inch ends
Constructed of black heavy-duty polycarbonate
Mobile POD® app specs
64 fully adjustable models based on celebrated vintage and modern gear (32 guitar amplifiers, 16 stompbox and rack effects, and 16 guitar cabinets)
Includes over 10,000 presets – right on your Apple® device – all free!
Save your own presets
Built-in tuner
Jam along with your iTunes® library
Free on the App StoreSM (Mobile In required for full functionality)
iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle).
You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
As an Amazon Associate I earn from qualifying purchases.
