2020
06/04
Found Sound Percussion App
Author View comments Tags Tags: , , , , ,

Klevgrand Tines Percussion App

Ting provides 12 different percussive sounds originating from t(h)ings that can be found in most of ordinary households. Each sound is carefully multi-sampled and processed with the common goal to be musically playable. Ting is intended to be a creative tool and a substitute for ordinary drum and percussion instruments. Altogether ~500 individual samples are used to make this instrument. In addition to the sounds, there is an EQ, a room simulator, a reverb and a compressor.

Tweaking parameters for each sound:

* Pan
* Gain Level
* Dynamics
* Room amount
* Reverb amount
* Pitch (-12 semitones to +6 semitones)

Global parameters:

* EQ – Treble, Midi and Bass gain levels
* 5 different rooms and 6 different reverbs
* Reverb decay time and a global reverb level
* Compression amount
* Output Level

Sounds available:

CAR KEYS – A subtle hit, works great as a hihat substitute
SILVERWARE – Fork and Knife
BIG BOX – A large wooden box with some junk inside slapped with the fist
FLOOR STOMP – Stomping the floor makes a great bass drum!
HAND CLAP – Natural hand clap
POT – A clay pot tapped with a finger
PAPER SCRATCH – Two papers rubbed against each other. Works as a shaker!
TOY DRUM – A kid’s drum hit with a plastic stick
SOFA SLAP – Hand palm on the office sofa
STICK ON EDGE – Wooden stick on a table edge
SNUSDOSA – A small round box with screws inside tapped
FINGER SNAP – Natural finger snap

Rooms available:

HOME OFFICE – A quite soft room with balanced reflections.
KITCHEN – Short decay time with bright tail.
LIVING ROOM – More tail, but not too bright.
HALLWAY – Damped room with lots of low end.
CLOSET – Clean response with a very short tail.

Reverbs available:

NATURAL – Sweet sounding classic reverb.
NORTH LAKE – Less high end but more natural.
MOONLIT – A bright smaller space.
GLACIER – Bright and large.
WOODEN – Slightly damped, but organic.
DYNAMITE – Large and lots of low end.

GET THIS APP HERE https://klevgrand.se/products/ting

2020
05/11
Klevgrand Ting Percussion
Author View comments Tags Tags: , , , ,

Ting is an instrument providing 12 different percussive sounds originating from everyday t(h)ings laying around at home – such as silverware, a sofa, toy drum or a pair of car keys. Each sound is carefully multi-sampled and processed with the common goal to be musically playable. Ting is intended to be a creative tool and a substitute for ordinary drum and percussion instruments. Altogether ~500 individual samples are used to make this instrument.

In addition to the sounds, there is an EQ, a room simulator, a reverb and a compressor.

MORE INFO HERE https://klevgrand.se/products/ting

2019
12/16
Klevgrand Hillman Synth
Author View comments Tags Tags: , , ,

Hillman Synth For iPad

Hillman is a synthlike instrument inspired by old combo-organs, string machines and similar vintage gear.
4 voices per note, each with selectable waveform (transistorish, tubeish, sine and special plasma), octave switch and a level control.
Sounds are generated with an analog approach, but does not use samples or sampled wavetables.

User interface
— Voices
Level – Level control.
Type – Select between Transistor, Tube, Sine-wave or a special plasma oscillator.
Octave – Octave offset for each note voice. (-1 to +2).
— ADSR

Envelope controls
— FXs
Ensemble – A classic ensemble chorus with 3 different modes
Phaser – 4 pole phaser with 2 different modes with different frequency ranges and notch depths.
Reverb – Lush reverb which ranges from small room to churchlike halls.

Output level – Overall level control

Get the Hillman Synth HERE

2019
11/11
Knorr Bass Exciter
Author View comments Tags Tags: , , , , ,

Knorr Bass Exciter App

Knorr is a plugin that adds intensity and edge to a monophonic low frequency audio source (like a bass). The algorithm adds overtones to an existing sound in a way that isn’t possible with ordinary distortion or filtering.

The Knorr Algorithm

The underlying algorithm uses a combination of filtering, amplitude- , and frequency modulation to process incoming audio. Although Knorr is developed with bass sounds in mind, it can be used on any monophonic sound source as long as there is audio content available in the low mids (and below).

**User interface**

XY Pad – Controls the bandwidth and amount of energy sent to the algorithm. Click and drag to move the marker.

Range (X-axis) – Sets a low pass filter frequency of the signal to be sent to the algorithm. Spans from 100 Hz to 1 kHz.

Level (Y-axis) – Sets the level of the low passed audio content.

Bite (SOFT, MEDIUM, HARD) – Alters the amount of intensity of the modulations.

Output – Sets the output level.

Bypass – Turns the effect on or off.

Frequency Response graph – Shows the frequency response of the internal modulation signal.

Note that Knorr is a AUv3 only and and needs to be launched via a AUv3 compatible host like GarageBand, Cubasis, Auria or similar. It will not work as a stand alone application.

More info, audio samples etc available at https://klevgrand.se/products/knorr

2019
10/02
Haaze 2 Stereo Widening App
Author View comments Tags Tags: , , , , , ,

Klevgrand Haaze 2 Stereo Widening App

Haaze is a 16 band stereo widening tool that utilizes three different methods of controlling the stereo width and spatial positioning of an audio stream.

• Haas – adds a small delay to the left or right audio channel which will make the listener believe the sounds arrives from the side that’s reaching the ear first.

• Pan – Alters the gain level on one of the audio channels. All 16 bands can be panned separately, so this method gets quite equal to the common “split eq” function in various equalizers.

• MS Stereo. Controls the output stereo width on each band, from normal stereo signal to mono.

There’s also a view for controlling the output gain of all bands separately.

Changes from the initial version:

• New and more transparent crossover filters
• Haas: Better control for each band
• Split EQ: Now called “PAN” and provides much more control over.
• MS Stereo: New feature in v2.0.0
• Gain: New feature in v2.0.0
• Visualization: New feature in v2.0.0
• Brand new and more intuitive UI for a better work flow.
• Several factory presets.

Full documentation available inside the app or at https://klevgrand.se/downloads/haaze-docs/

Haaze 2 is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.

Audio examples and more info at https://klevgrand.se/products/haaze

  • DAILY STATS


    3,630
    VISITORS
    TODAY
    Powered By Google Analytics
  • iPad Loops is a music app blog dedicated to exposing the best iPad apps for iOS musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my loops are Retronyms AudioCopy, LP-5, iPRO.DJSAMPLER, Looptastic, and Audio Elements. My work is published by Magix Soundtrack Loops, Sample Logic, Acoustica, Xmix, and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Categories

  • Recent Posts

  • Tags

  • Archives