2022
08/22
Red Rock Sound CL1 Compressor
Author View comments Tags Tags: , , , , , ,
Soviet Compressor for iOS

Soviet Compressor for iOS

Red Rock Sound CL1 is stereo and mono audio signal dynamic range compressor. CL1 compressor has distinctive sound allowing its usage not only for technical purpose of dynamic range compression but also for artistic sound coloration, which happens due to usage of saturation with even harmonics, dithering that gives effect of «air» and oversampling with non-linear phase response that gives effect of «depth».

CL1 compressor besides main dynamic range compression module also contains limiting module («limiter»), which allows controlling peaks passing through the compressor, mid-range equalizer module doing ISO-226 curves equalization and input signal or gain reduction VU-meter with lamp indicator for limiter operation control. CL1 compressor has adjustable high-pass filter for side-chain signal, also supports «parallel» compression and M/S operational mode.

FEATURES

Two different attack modes: «fast» and «slow»;
Softness of compressor characteristics control;
6 operation modes: double mono, mono with external side-chain signal, mid channel, side channel, M/S, linked stereo;
Mid-range equalizer and Side-chain signal high-pass filter;
Pre- or Post-Limiter;
Attack and Release times multiplier;
Internal Dithering;
Parallel compression;
8x oversampling and 64-bit floating point processing;
External Side-chain.
ATTACK MODE

Red Rock Sound CL1

Red Rock Sound CL1

In «Fast» mode when control signal reaches Threshold the compressor immediately and very fast starts to lower the signal level slowing down by exponential law;
In «Slow» mode the compressor in the same situation starts gain reduction very slowly thus most attack of the signal passes through.
MID SCOOP

The built-in mid-frequencies equalizer is based on mid-frequency range equal loudness curves design and can be used as another tool to position instruments, with ability to highlight backside elements or to add a bit density to frontal elements and move them back at the same time.
CL1 developed on the basis of «МОЛОТ» compressor by Vladislav Goncharov.

RRS CL1 AUv3 plug-in — comes as time-limited Demo-version for you to try. It gives you 5 minutes of Free play time. (You can reload the CL1 AUv3 plug-in as many times as you want, thereby you get the Demo period again and again.) Unlimited version of CL1 AUv3 plug-in comes as In-App Purchase.

To use CL1 as a plug-in, you need an AUv3-compatible host app like GarageBand, Auria, AUM, Cubasis and more — CL1 will appear in the list of Audio Unit extensions for effect plug-ins in the host app.

Get Red Rock Sound CL1 HERE https://redrocksound.pro/products/cl1-au/

2022
03/04
Bandlab Making Beats for FREE
Author View comments Tags Tags: , , , , , ,

iOS music youtuber Brandon Rico says Bandlab is one of the best iOS music production apps. Check out his latest video to learn why he feel this way about it.

How to get started Making Beats for FREE on your Mobile Device 2022 using BandLab.

One of the best free ios music production apps 2022.

2020
06/17
Bleass Shimmer AUv3 Effect
Author View comments Tags Tags: , , , , , ,

Shimmer Reverb Delay Pitch for iOS

BLEASS Shimmer is an AUv3 compatible studio quality Shimmer Reverb Effect that brings stunning harmonic tails to any sound or instrument with very low CPU usage.

While giving users an innovative and clear interface to enhance musical creativity as well as live performance usability, the BLEASS Shimmer brings highly versatile sonic possibilities thanks to its countless combinations of parameters. From angelic sheens, ambient washes to otherworldly chimes, let BLEASS Shimmer make your guitars, strings, pads, vocals, drums shine! BLEASS Shimmer comprises 6 customizable stages which reveal themselves via 30+ presets.

These stages include:

INPUT STAGE:

• Touch control filter with two filter types: Low-Shelf and High-Pass
• Input gain
• Reverb pre-delay

2 PITCH SHIFTER STAGES:

– Two different pitch shifters each offer 3 pitch-shifting modes:
• PRE (signal is pitch shifted and sent directly into the reverb stage)
• POST (reverberated signal is pitch-shifted)
• FEEDBACK (reverberated signal is pitch-shifted and fed back again into the reverb stage)

– Each Pitch Shifter can be tuned with
• Pitch control [-24st; +24st]
• Fine control [-0,5st; +0,5st]
• Delay Time control
• Amount slider

REVERB STAGE:

• Room size control
• Color parameter (control the reverb’s high frequencies)
• Reverb Room Size modulation (amount and rate)
• Length control (200ms – 30s)

DUCKER STAGE:

• The ducker compresses the output signal using the dry signal as sidechain to bring more clarity
• Compressor parameters: Threshold, Attack and Release.
• Visual Input Sidechain Meter

MIX STAGE:
• Dry/Wet Mix

Tutorial:

In this example I used Shimmer on the main arpeggiated synth:

GET BLEASS SHIMMER HERE https://bit.ly/BLEASSShimmer

2020
06/09
Apesoft Accordion App
Author View comments Tags Tags: , , , , ,

Accordion Vintage Logo

Accordion Vintage is a virtual sampled instrument based on an original. Italian accordion made in Castelfidardo in the 60s years. The sound has been captured with amazing technical tools. Accordion Vintage consists of almost 1300 samples perfectly looped, 4 velocity layers, key-on and key-off noises for a more realistic sound.

Features:

° Full Audiounit (AUv3) support
° iOS Universal
° Audiobus and Inter-App Audio
° Audiobus 3 MIDI support and state save
° Share Presets and Samples between App and AUv3
° Built-In effects: Stereo Delay, Vowel Filter, Sterealizer and Classical/Vintage Reverberator
° Keyboard Ribbon Style
° Keyboard scales quantize
° Full Parameters MIDI/LFO/Accelerometer mapping
° Presets Interpolation Pad
° MIDI Clock and Ableton Link
° Record to .wav file
° AudioCopy/Audioshare/Open In… etc…

Get this app here https://apps.apple.com/app/id1510723507#?platform=iphone

2020
06/09
Eventide Crystals For iPad iPhone
Author View comments Tags Tags: , , , , , ,

Eventide Crystals for iOS iPad and iPhone

Eventide Crystals Harmonizer® combines twin reverse pitch shifters with reverse delays and reverb. This iconic H3000 effect can be used to create out-of-this-world climbing and cascading pitched delays or to create unique sounding reverbs. It features two reverse granular delays that can be manipulated by length and pitch. Crystals excels at adding life to boring synths, guitar, and vocals making them sound huge and majestic. From sound design to other-worldly solos, Crystals will spark inspiration.

The innovative RIBBON control allows you to modulate many parameters at once. Manipulate the pitches to play it like an instrument or slowly increase feedback to make your signal explode into infinity. Need some extra gusto? Hold down the FLEX button to shift one octave up from the current pitch.

Features:

– Two pitch-shifters, each with a four-octave range from two octaves down to two octaves up

– Two independently adjustable delays, up to 4 seconds each, with their own individual feedback

– Reverb with 100 seconds of decay

– Make it musical by micro-pitching each voice around the 4th (500 cents), 5th (700 cents), or octave (1200 cents)

– Smooth out delay grains by applying up to 4 seconds of delay for each voice

– RIBBON lets you ‘play’ the effect in real-time and provides dynamic and fluid control to morph back and forth between the settings of your choice

– FLEX shifts both voices up one octave at the push of a button

– MIXLOCK keeps MIX control constant as you audition presets

– Available as an Audio Units AUv3 plug-in, Inter-App Audio, and Standalone App

Get this app here https://apps.apple.com/app/id1504257443?fbclid=IwAR2QMqx-Bgl2A7rlr0zDRMsbLJUvrmLVwpf2HzHmgRmMofZMyfQ7QjwTuzs

  • iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
    As an Amazon Associate I earn from qualifying purchases.
  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed

    Instagram
  • Become a patron at Patreon!
  • Categories

  • Recent Posts

  • Tags

  • Archives