2017
08/31
Egsy01 Ver 2 Audiobus 3 and Presets
Author View comments Tags Tags: , , , , , , ,

ElliottGarage presents EGSY01 analog synth v2.0, featuring InterApp audio, CoreMIDI, Audiobus and much more! With EGSY01 you can create sounds without any limit, from modern ones to vintage analog ones, working with arpeggiator, step sequencer and FM, addictive and subtractive synthesis. The totally brand new audio engine generate your sound mixing 2 oscillators with 4 selectable waveforms, and you can watch the sound created on the oscilloscope screen.

What’s New in Version 2.3.4
– New presets browser
– 20 new presets by Red Sky Lullaby
– Audiobus 3 support
– Design optimization for iPhone screen

You can set the sounds through the panels “Oscillators”, “ADSR/LFO”, “FM”, “FX” and “Settings”, and play with any master keyboard or MIDI controller (CORE MIDI), or creating a wireless MIDI network, or again sending the audio signal to other apps with InterApp audio or AUDIOBUS.

The keyboard is touch sensitive, and you can modulate the sound by sliding your finger up and down on the keys or moving the pitch modulation (assignable to various parameters of the synth from “Settings” panel). You can also set your favorite musical scale on the keyboard and easily play over your songs.

Stereo delay and Arpeggiator steps time can be synchronize in the BPM tempo panel, to generate incredible rythmic figures.

Features:

– 2 oscillators with selectable waveforms, volume, octave e detune
– InterApp Instrument
– MIDI In from other app and MIDI controllers
– 4 Waveforms (Sine, Saw, Triangle, PWM)
– Core midi/Network midi
– MIDI Learn functionality to map all knobs and slider to your external MIDI controller
– Vca / Vcf
– Evenlope ADSR
– FM Synthesis panel (with 2 operators)
– Panel BPM tempo, with tap tempo, tempo sync for Delay & Arpeggiator, and subdivisions (4/4, 6/8 and 8/8)
– Arpeggiator – 4 different types of arpeggiator, gate, selection arpeggio octaves
– Step sequencer with selection from 4 to 16 steps and pitch values ​​root, fifth, 1 octave, 1 octave fifth, 2 octave
– Setting for keyboard and arpeggiator portamento
– Stereo delay (can be synchronized with the arpeggiator)
– Panel FX (delay + crush + noise)
– VoiceSynth effect with Keyboard Controlled option
– Granular effect
– High Pass and Low Pass Filter
– Keyboard with 6 octaves and control on filter cutoff
– Keyboard musical scales (56 different types)
– Modulation wheel can be assigned to different parameters
– Oscilloscope
– Presets save – overwrite
– LFO with selectable amplitude and frequency
– Audiobus
– Polyphony
– Universal App

Get Egsy01

2017
08/03
NFM FM Synth For iOS
Author View comments Tags Tags: , , , ,

NFM is an intuitive FM synthesizer with a streamlined interface. It works as an Audio Unit extension inside a host application such as GarageBand, Cubasis, Auria Pro, modstep and AUM.

Key features
• Six stereo operators
• Fully customisable FM algorithm
• Oscillators: sinusoid, noise, fixed frequency
• Envelopes with adjustable level, time and curve parameters
• Operator amplitude can be modulated by the stereo LFO, key or velocity
• Pitch envelope, vibrato
• Build-in effects: distortion, delay, flanger
• Voice modes: monophonic, polyphonic, legato, glide
• Preset management inside the app
• Numeric pad for entering parameter values precisely

Get NFM Synth

2017
05/18
Klevgrand Syndt Synthesizer For iPad
Author View comments Tags Tags: , , , , ,

Syndt is a high quality polyphonic synthesizer with a lot of possibilities. The oscillator waveform can be morphed between pure sine to pure square and supports alternation of pulse width. Both the shape and pulse width can be modulated by two independent LFOs. Finetuned low pass and high pass filters combined with a separate filter attack setting (optionally based on velocity) makes possibilities to create some raw and interesting sounds.

The additional LFO can be shaped exactly as the oscillator, and optionally controls filters, gain and pitch (using a modulation wheel or just automatcally). This LFO can be synchronized to a AUv3 host.

Globally there’s a nice stereo chorus, ping pong stereo delay (that also can sync to a AUv3 hosts bpm) and EQ.

Key features:

* AUv3, works with AUv3 compatible hosts like GarageBand, Cubasis, Auria, AUM etc.
* 70 professionally made presets
* XY pad based oscillator and LFO (PWM on the X axis and morphs between sine and square on the Y axis)
* Independent mini-LFO (sine only) for each axis of the oscillator XY-pad.
* LP / HP filter with resonance
* LP Filter can be velocity sensitive
* LP Filter has an optional attack time
* LFO can affect LP filter, HP filter, gain level and pitch
* LFO has an optional attack time
* LFO can be syncronized with an AUv3 host (AUv3 mode only!)
* Ping pong stereo delay (optionally syncs to host)
* Stereo Chorus
* Three band EQ
* Legato mode with glide speed parameter
* Pitch bend range

Important: Syndt in stand-alone mode does not support IAA or MIDI. You can try it out using the keyboard at the bottom, but that’s it. We recommend using Syndt with AUv3 compatible hosts.

OBS! Syndt oversamples the signal and uses sophisticated DSP features which makes it consume quite some CPU. An iPad AIR 2 or better is recommended if you’re planning to use many voices simultaneously.

Get Syndt

2017
03/08
LayR Multi Timbral Synthesizer For iOS
Author View comments Tags Tags: , , , , , ,

LayR is a massively polyphonic, multi-timbral synthesizer for iPad and iPhone, optimized for modern 64 bit devices delivering up to 256 voices of rich, multi-layered and textured sounds.

LayR’s primary sounds are called Performances: A Performance is a set of Instruments where each instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of over 100 instruments each with it’s own MIDI channel and crossfading keyboard span. Voices are assigned to each layer in each instrument until the audio engine runs out of available voices. This means that with normal playing technique it is possible to create extremely complex texture on each note or even to have a single insane monophonic instrument equivalent to 100 synths all playing at once!

Every Layer has a dual oscillator which can morph with modulation between two shapes and phase states, two rich and warm state variable filters and a mixer to blend the oscillator with filters in any serial/parallel combination. For modulation (Frequency, Amplitude and Phase) there are two aux oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. 2 loopable ADSR envelopes ranging from fractions of a millisecond to 100 seconds, a volume level ADSR and a random level generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating ambient textures with extremely long evolution cycles.

Focused at keyboard players looking for a mobile synth that can be reliably used live on stage it is equally at home in the studio. LayR is provided with an extensive selection of usable instrument and performance presets which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths. There is also an 8 channel arpeggiator with a 16 step event sequencer for creating exciting polyrhythmic patterns. Full IAA and Audiobus compatibility means LayR can be used with hosts and other music apps on iOS.

FEATURES
– Optimised 32 bit Audio Engine.
– Up to 128 Voices ( 256 on iPad Pro ).
– Multi-Timbral with 8 individual stereo instrument outputs + full mix output.
– Multi Channel Arpeggiator with 16 step event sequencer.
– Stereo Delay, Reverb and EQ on output section.
– Ranged MIDI control for all parameters.
– AudioBus and Inter-App Audio compatible.
– Performance and Program preset import & export via iTunes.
– Performance and Program preset sharing via iCloud Drive.
– Built-in Help

LayR is tested as thoroughly as possible and we hope there are no bugs left! If you do find one, rather than writing a negative review because of it, please report it to us either on our forum or by contacting support from our website. We hate bugs too and we’re always ready to stamp them out quickly.

Get LayR

2017
02/14
Oval Free Synthesizer For iOS With Audiobus Support
Author View comments Tags Tags: , , , ,

The Oval App is a music, synthesis and effects platform designed from the ground-up to revolutionize music creation, learning and live performance.

When paired together with the Oval physical controller, the App allows you to take full advantage of each subtle gesture, combining the expressiveness of an acoustic instrument with the flexibility of modern digital synthesis.

A NEW ESSENTIAL FOR MUSIC CREATORS
Tweak your favorite sounds from the growing collection of high quality instruments by adding effects such as filters, delays, and reverb. All the instruments in the library have been carefully crafted by professional sound designers, making the most of the Apps powerful gesture mapping functionality.

HOT FOR MUSIC ENTHUSIASTS
The Oval is also designed for those new to music creation. The intuitive layout will make it easy for you to immerse yourself in the music, and the large built-in scale collection allows you to explore different moods while always staying in key.

SHARE YOUR CREATIONS
When inspiration strikes, record your creations and share them with your friends, or export them to another music app and take them to the next level.

What’s New in Version 1.1.0
– Audiobus compatibility
– Deactivates processing when not in use, significantly reducing battery drain
– Bluetooth connection to the Oval
– 5 new scales

TECHNICAL FEATURES
– Exclusive sound libraries
– X/Y sensitive performing pads
– Large (and growing) list of scales from around the world, including microtonal scales
– Customizable filter, delay, reverb and dynamics effects
– Recording feature with simple editing capabilities like trim and fade in/out
– Compatible with other apps that use MIDI
– Customizable A4 frequency
– Audiobus compatible

MINIMUM REQUERIMENTS
– iPad 2
– iOS 8 operating system

Get Oval

  • DAILY STATS


    10,572
    VISITORS
    TODAY
    Powered By Google Analytics
  • iPad Loops is a music app blog dedicated to exposing the best iPad apps for iOS musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle). You might know me from my royalty free loop packs and sound design. Some of the apps that contain my loops are Retronyms AudioCopy, LP-5, iPRO.DJSAMPLER, Looptastic, and Audio Elements. My work is published by Magix Soundtrack Loops, Sample Logic, Pakotec, Loopmasters, Acoustica, Xmix, Sound Trends, and many more. Subscribe to our RSS feed below to get updated when new apps are posted.

  • SUBSCRIBE:

  • FOLLOW ON YouTube

    FOLLOW ON Reddit

    iPadLoops RSS Feed



    Instagram
  • Categories

  • Recent Posts

  • Tags

  • Archives

  • Alexa Rank