Nembrini Audio JMP Pro Guitar Amplifier plugin is based on a Marshall JMP1* preamplifier.
JMP Pro Valve Amplifier drives pure tone into each of its four uniquely voiced channels OD1, OD2, Clean1 and Clean2
OD1: This channel’s smoldering power will take you from the molten gold of a classic British sound, to searing metal and all points in between.
OD2: Tightly focused, high gain is served up here by the truckload. Modern and aggressive, yet fluid and toneful. This channel has all the distortion and sustain you’ll ever need.
Clean1: It is perfect for warm full-bodied chords, fat clean lead passages and jazz tones.
Clean2: It has the glassy edge of a classic British sound for those bright, jangly tones.
JMP Pro Nembrini
POWER AMPLIFIER
Powered by four EL34 virtual tubes with presence, volume and power switch in class AB push-pull configuration.
DIGITAL DELAY
FILTER make the delay Lo-Fi and OFFSET create a time offset in left/right delay sections
ANALOG MODULATIONS
select Chorus or Tremolo modulation
AMBIENT REVERB
Hall reverb algorithm
FILTERS CLEANER
Low and High cut filters PRE and POST amplifier
ANALOG NOISE GATE
tuned for guitar and bass
STUDIO COMPRESSOR
keep your dynamics in check, whether just thickening the sound or keeping levels consistent
Works as a standalone app, AudioUnit v3 effect, or Inter-App Audio effect.
Nembrini Audio Overdrive Special Guitar Amplifier plugin is based on a Overdrive Special By Dumble* schematic #124.
Nembrini Audio Overdrive Special s a two channel amplifier, which includes a clean channel and an “overdrive”channel.
The overdrive channel is described as “cascading” from the first channel into, at least, one additional gain stage in the overdrive channel. This means that the clean channel’s tone stack and gain stages will “cascade” into the gain stage of the overdrive channel, causing the clean channel to become “overdriven”.
Nembrini Audio Overdrive Special features a 3-band equalizer and one volume control for both channels, but each channel has its own gain control.
The gain controls LEVEL and RATIO interact when the overdrive channel is engaged to allow a harmonic change in gain.
The Overdrive Special guitar amplifier plugin includes a complete recording chain emulation and our custom design noise gate circuit.
Works as a standalone app, AudioUnit v3 effect, or Inter-App Audio effect
STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and effects slots. These modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms.
The amp module offers 12 different amplifier profiles. It has both a clean mode and a overdrive mode, an equalizer functionality (including presence), and a booster controlling the end stage amplification saturation.
Cabinet simulation consists of 10 different cabinets of various sizes and sound. This module also offers a stereo width knob that simulates the distance between two microphones put in front of the cone.
Room simulation offers 6 different kinds of rooms, where each room size can be changed between Small, Medium and Large. There’s also a decay parameter controlling reflectivity of the walls and a dry/wet mix.
The pedal board contains 4 slots where any of the 14 effects can be inserted. The order of the pedals can easily be changed using drag and drop.
STARK is a fully fledged amplifier simulator consisting of four modules: Amplifier, Cabinet, Room and effects slots. These modules are processing audio separately, which makes it possible to combine different amplifiers with different cabinets and rooms.
The amp module offers 12 different amplifier profiles. It has both a clean mode and a overdrive mode, an equalizer functionality (including presence), and a booster controlling the end stage amplification saturation.
Cabinet simulation consists of 10 different cabinets of various sizes and sound. This module also offers a stereo width knob that simulates the distance between two microphones put in front of the cone.
Room simulation offers 6 different kinds of rooms, where each room size can be changed between Small, Medium and Large. There’s also a decay parameter controlling reflectivity of the walls and a dry/wet mix.
The pedal board contains 4 slots where any of the 14 effects can be inserted. The order of the pedals can easily be changed using drag and drop.
Available amps
• American Guitar 1 – An edgy amp that rounds of nicely at the top
• American Guitar 2 – Similar to American Guitar 1, but with some more presence
• British Guitar A 1 – Gives a full sound with crisp
• British Guitar A 2 – Similar to British Guitar A 1, but with more body
• British Guitar B 1 – A slightly saturated amp with nice character in the high mids
• British Guitar B 2 – Is just like British Guitar B 1 a bit saturated, but with a more linear frequency response
• Vintage Guitar – Gives that perfect thickness when playing jazz and soul
• General Tube Amp – Low saturation with a fairly linear frequency response
• Garage Sale Amp – Limited frequency response and saturates. The obvious LoFi choice
• American Bass – A versatile pro bass amp
• British Bass – Works fine for more edgy bass playing
• Vintage Bass – Perfect for soul/jazz/RnB
Available cabinets
• Wide Small – Small speakers, lots of resonances
• Tight Small – Small single speakers, few resonances
• Wide Combo – Medium speakers, lots of resonances
• Tight Combo – Medium speakers, few resonances
• Wide Normal – Medium speakers, moderate resonances
• Tight Large – Full range speakers, few resonances
• Wide Large – Full range speakers, lots of resonances
• Radiola – Small (broken) speakers, moderate resonances
• Bass – Low end speaker/Medium speakers, few resonances
• Passthrough – Full range speakers, no resonances
Available ambiences
• Normal – A good sounding recording room
• Dark – A room that gives attenuated high frequencies
• Bright – More significant reflections at higher frequencies
• Cold – A room with attenuated low frequencies
• Warm – Gives a livingroom:ish sound
• Boomy – Loud and lots of resonances
Available FX pedals
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – 6 band peak filter with fixed frequencies
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Distortion+ – Complex distortion pedal with optional distortion algorithms
• Gate – Simple gate
• Multiband Gate – Four band spectral gate
There are also about 100 predefined factory presets covering most scenarios.
Full documentation available inside the app or at https://klevgrand.se/downloads/stark-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! STARK consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
STARK is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
Available amps
• American Guitar 1 – An edgy amp that rounds of nicely at the top
• American Guitar 2 – Similar to American Guitar 1, but with some more presence
• British Guitar A 1 – Gives a full sound with crisp
• British Guitar A 2 – Similar to British Guitar A 1, but with more body
• British Guitar B 1 – A slightly saturated amp with nice character in the high mids
• British Guitar B 2 – Is just like British Guitar B 1 a bit saturated, but with a more linear frequency response
• Vintage Guitar – Gives that perfect thickness when playing jazz and soul
• General Tube Amp – Low saturation with a fairly linear frequency response
• Garage Sale Amp – Limited frequency response and saturates. The obvious LoFi choice
• American Bass – A versatile pro bass amp
• British Bass – Works fine for more edgy bass playing
• Vintage Bass – Perfect for soul/jazz/RnB
Available cabinets
• Wide Small – Small speakers, lots of resonances
• Tight Small – Small single speakers, few resonances
• Wide Combo – Medium speakers, lots of resonances
• Tight Combo – Medium speakers, few resonances
• Wide Normal – Medium speakers, moderate resonances
• Tight Large – Full range speakers, few resonances
• Wide Large – Full range speakers, lots of resonances
• Radiola – Small (broken) speakers, moderate resonances
• Bass – Low end speaker/Medium speakers, few resonances
• Passthrough – Full range speakers, no resonances
Available ambiences
• Normal – A good sounding recording room
• Dark – A room that gives attenuated high frequencies
• Bright – More significant reflections at higher frequencies
• Cold – A room with attenuated low frequencies
• Warm – Gives a livingroom:ish sound
• Boomy – Loud and lots of resonances
Available FX pedals
• Delay – Digital stereo delay
• Chorus – Classic chorus
• Flanger – Flanger with feedback, tone, speed, mix and amount
• Phaser – Classic phaser with the option to decide how many stages to be used
• Reverb – Digital reverb
• Vibrato – A stereo vibrato with reshapeable curve
• Tremolo – A stereo tremolo with reshapeable curve
• Equalizer – 6 band peak filter with fixed frequencies
• Compressor – Simple one-knob compressor
• Booster – Signal booster (gain, bass and treble)
• Distortion – Simple distortion pedal with tone control
• Distortion+ – Complex distortion pedal with optional distortion algorithms
• Gate – Simple gate
• Multiband Gate – Four band spectral gate
There are also about 100 predefined factory presets covering most scenarios.
Full documentation available inside the app or at https://klevgrand.se/downloads/stark-docs/
Audio examples and more info at https://klevgrand.se/products/stark
Obs! STARK consumes a lot of CPU and RAM, so if you’re having trouble using multiple instances at the same time, try to freeze some tracks and/or increase the buffer size.
STARK is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.
** Guitar Tab Player As Well As Guitar Effects Processor and Guitar Amp **
Tab PlayAlong is an app that allows you to manage, view, play guitar tabs, and play along with it!
Want to play or jam along with a song, but can’t find a backing track? Tab PlayAlong made it easy for you to use guitar tabs as your backing track. You can also practice and record to check your performance, in a efficient way.
Features:
– iOS 11 Document-based interface that made it easy to manage and synchronize your tabs
– Support gp3/gp4/gp5/gpx/gp file formats
– Playback of guitar tabs, support mute/solo and volume adjustment of any track
– Export tab to audio file with current mute/solo/volume settings to do editing and recording in apps like GarageBand or other DAWs
– Connect your guitar and play with tabs, using an amplifier and multiple effect pedals
– 1 Amplifier with clean and distortion channel based on tube amps, and effects including reverb, delay, chorus, tremolo. We will add more.
– Record your playing to share or just to check your performance
– iPhone and iPad universal app.
Compatible with standard iOS audio interfaces, or standard USB audio interfaces that compatible with iOS devices (Need to use an Apple Camera Adapter)
BIAS Amp is a professional virtual amp designer that offers replications of 36 of the best vintage and modern amps in rock. With BIAS Amp, you have the power to create new sounds by designing your custom dream amp—swap out the tubes, preamp, transformer, tone stacks, cab, and mic, all via a powerful, intuitive interface designed for your iPad.
Close your eyes, and you’ll swear you’re hearing the real thing. With BIAS Amp, you own a complete virtual collection of the most coveted and unique guitar amps of all time—some dating as far back as the 1940s. Every amp model is meticulously engineered to respond to your playing with immediacy, sensitivity, and realism that make you not only sound better, but also play better. And BIAS Amp sounds great on bass guitar, too.
But BIAS Amp doesn’t stop there. Create totally new sounds by designing your custom dream amp. It’s as easy as tap and drag. Using BIAS Amp’s highly intuitive and Lightning-fast interface, it’s child’s play to instantly swap out colorful tube preamps, lush distortion circuits, classic tone stacks, boutique power stages, custom-built transformers, and cabs loaded with specially matched speakers. The result is a depth and range of tones that’s unachievable using traditional guitar amps or other modelers. Whether you’re a classic rocker, metalhead, jazz player, bluesman or singer-songwriter—and whether you understand how amplifier electronics work or not—you’ll be dialing in killer, exclusive tones in a heartbeat.
BIAS Amp integrates seamlessly with Positive Grid’s BIAS FX and JamUp guitar multi-effects apps for iPad, expanding BIAS Amp into a powerful and completely unified professional guitar system for live use, recording, and jamming. Simply tap the JamUp icon on BIAS Amp’s upper bar to open your current BIAS Amp setup directly in either JamUp or JamUp Pro. JamUp adds 1 amp and 6 effects to your BIAS Amp rigs; JamUp Pro adds 6 amps and 16 stomp-box and premium rack effects – including distortion, compression, tape delay, tremolo, and spring reverb. Both JamUp and JamUp Pro include Jam player, 8-track recorder and phrase sampler, tuner, and metronome, effectively turning BIAS Amp into a recording studio and top-of-the-line practice utility.
BIAS Amp works with GarageBand and other audio apps using iOS’s Inter-App Audio and Audiobus. Whether recording, songwriting, or honing your chops—at home or on the road—BIAS Amp places unequaled tone at your fingertips.
UPDATE:
– Closed back cabinets can now be enabled and dragged into the signal path
– New tonestacks are now accessible in the demo version
– New tonestacks are now accessible by BIAS AMP 1 owners
– Random crashes
Features:
• Complete, accurate, and versatile amp modeling
• 36 amp models included with the introductory release
• Factory categories that allow you to organize amps by music genre and sonic impact (clean, blues, twang, crunch, metal, acoustic, and bass)
• Fully customizable preamps, tone stacks, power amps, transformers, cabinets, and mic selection and placement – mix and match!
• Customize the look and feel of your amp panel by changing the name, tolex, panel, and knobs
• Ability to work the way guitarists think: Tweak gain and overdrive, swap out tubes and transformers, change the cabinet and mic position, and shape the tone with different tone stacks and two 8-band equalizers
• Noise gate and room simulator
• Create a virtually unlimited number of custom amps
• Preset to recall each of your 8 favorite settings
• Works with GarageBand and other audio apps via Inter-App Audio and Audiobus
iPad Loops is an iOS music production blog dedicated to exposing the best iPad apps musicians, producers, and Djs. This is not a database of every app. It is, however, one of useful recommendations from someone with many years in music production. I try to update it on a daily basis (ok sometimes every two days) and I do my best to post useful apps only. My name is Jason Donnelly (Dj Puzzle).
You might know me from my royalty free loop packs and sound design. Some of the apps that contain my sounds are Synth One, EG Segments, Hammerhead, Retronyms AudioCopy, Audio Evolution Mobile, LP-5, iPRO.DJSAMPLER, Looptastic. My work is published by Roland, Antares, Magix, Soundtrack Loops, Sample Logic, Acoustica, Loopmasters and many more. Subscribe to our RSS feed below to get updated when new apps are posted.
As an Amazon Associate I earn from qualifying purchases.
